Many thanks.
Special grease (Barrierta) for CD mechanism Beocenter 9300
5 replies
The B&O workshop manual recommends using Barrierta L 55 - 3, to lubricate parts of the CD mechanism on later models of the Beocentre 9300. Apparently this should fix a problem of intermittent drop outs. This grease is unbelievably expensive, and commercially is only available in large quantities. Does anyone know where I can get a small quantity?
Many thanks.
Many thanks.
Hi and welcome!
One of our sponsors, Danish Sound Parts, offers this:
One of our sponsors, Danish Sound Parts, offers this:
Location: Warwickshire, UK
My B&O Icons:
Hello Guy.
Many thanks for the advice. I will contact Danish Sound Parts and see what they say. The grease they advertise is Barrierta L 55 – 2. rather than the B&O recommended L55-3.
My 1996 beocenter's CD works really well, but occasionally (once or twice during a CD's playback), it drops sound for a second.
I will let you know the outcome.
Best wishes,
Nigel.
Many thanks for the advice. I will contact Danish Sound Parts and see what they say. The grease they advertise is Barrierta L 55 – 2. rather than the B&O recommended L55-3.
My 1996 beocenter's CD works really well, but occasionally (once or twice during a CD's playback), it drops sound for a second.
I will let you know the outcome.
Best wishes,
Nigel.
I recently serviced my Beosound 2300 with exactly this grease (purchased for a Beogram, but I thought it approprite to CD rails as well.) I'm not sure if it was my cleaning the old grease off the rails and/or the new grease, but between the two of them it totally fixed a 'jumping' problem I had on every CD around the same proportion through the disc. I'm glad I tried this first before swapping out the laser....
Location: Silicon Valley
My B&O Icons:
Many thanks for the helpful comments. I emailed Danish Sound Parts who replied within a few minutes to confirm this grease is suitable for CD rails. I will post the results in a few weeks when the job is done.
Once again, many thanks, and best wishes.
Nigel.
Once again, many thanks, and best wishes.
Nigel.
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member