Service Kit for BeoCom 6000?

15 replies
K(
Offline
Ken (archived)
Bronze
Posted February 11, 2008 at 03:48 GMT
#1833826

Hi all,

A few weeks ago i got the information from this Forum that I could buy a Service Kit for BEO4. I did this and have now updatede two very old BEO4 to the latest version for an accepatble price.

I was thinkg off doing the same with some very old (10 yesrs) BeoCom 6000 that I have (one is nok working and the other have some problems). Do someone know if there are a Service Kit abealible for Becom 6000 (old version) and what the price is?

Regards,

Ken

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted February 11, 2008 at 03:59 GMT
#1833827

Ken,

The details of the kit you are talking about for the Beocom 6000 are HERE

Location: Hampshire, England

K(
Offline
Ken (archived)
Bronze
Posted February 11, 2008 at 05:00 GMT
#1833828

Hi Keith,

Thanks for the info. It looks like you are getting all parts of the phone. What do you not get and have to carry forward from your old phone?

Ken

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted February 11, 2008 at 05:10 GMT
#1833829

Ken,

You are correct and that is why frankly it is a good deal if a user has a Mark I Beocom 6000 and wants a Mark II.

So, you DON'T get the following:-

  • Microphone
  • Speaker
  • Battery
  • Back Cover including battery cover
  • Any screws, you use the originals

You DO get

  • A new front cover and keypad
  • One black & one white connector for keypad to circuit board connection
  • New Display to allow for lowercase characters
  • The main printed circuit board

Location: Hampshire, England

K(
Offline
Ken (archived)
Bronze
Posted February 11, 2008 at 05:29 GMT
#1833830

Hi Keith,

Thanks again. Just talkt with my dealer, and he told me that they are not allowed to oder this from B&O, as all phone repair is handled by one company. This is for Denmark, could be that the set-up are differeny in other countries.

Do you know where in U.K. I could oeder thise service kit from?

Ken

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted February 11, 2008 at 05:59 GMT
#1833831
You have a PM Ken...

Location: Hampshire, England

JO
Offline
jonniebravo1963
BronzeFounder
Posted February 11, 2008 at 11:57 GMT
#1833832

B(
Offline
blacktony (archived)
Bronze
Posted February 19, 2008 at 17:59 GMT
#1833833
Before you get the kit you need to make sure you have 2.5 software in your base/pstn otherwise the kit is a waste of time.
K(
Offline
Ken (archived)
Bronze
Posted February 20, 2008 at 02:52 GMT
#1833834

How do I check the SW version in the base?

 Ken

B(
Offline
blacktony (archived)
Bronze
Posted February 20, 2008 at 03:58 GMT
#1833835

Type 9#9#9*int the phone will then say hs sw version,move the wheel clockwises to say bs sw version then press the ok button thats the one in the middle .the top number should read 2.50 if not the base will need a software update.

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold