Penta MkII's and BC9500

22 replies

Hi All, just need a quick confimation here.  I just picked up a pair of Penta II's and am connecting them to my BC9500.  I have been looking for a pair of Penta III's for over a year now and haven't found a pair within driving distance.  Doesn't anyone buy B&O near Detroit?  So I recently found a pair of 2's in excellent cosmetic condition, with no foam rot, at a very reasonable price.  So instead of waiting forever for a pair of Penta III's, I bought the II's.  If a pair of III's come along, I may consider upgrading.

The speakers came with Speakerlink wires, so I am going to buy a pair of MkII Powerlink cables and connect them that way.  All the threads I have read seem to indicate that this (Powerlink) is the best method of connecting them to the 9500.  In the meantime, I just wanted to make sure I have the switches Pentas set correctly using the Speakerlink:

Audio/Video Switch:  Set to Audio.   Input switch: Set to level 1.    Mode switch: Set using L & R.   Bass Extension Switch:  Set to 3 (I have a big room).  Does this seem right?

Many thanks for the help,

Tom

PS:  I did read all the "Powerlink/Penta" threads I could before I asked this, probably by now, very tedious question.

One more thing; does it matter which Powerlink cable I buy, as I do not know how many types are available and the difference between each one? Also, if there is anyone you would recommend I purchase them from (other than just saying "eBay") that would be nice.

Thanks in advance.

Tom  

Hi and congratulations on your Pentas!

Any B&O dealer can provide you with Powerlink Cables. As far as I know, they have to be fully wired (Powerlink MK3 cables I suppose they are called?) to also send a signal to the displays of the Penta, anyone please correct me if I am wrong.

Enjoy!

Christian

You need fully wired or thick powerlink cables. Lifestyle can send you some and you will get the correct type. Penta 2 and 3s are just about identical except for the displays.

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beovision-11.png Beovision-11.png
Beotime.png Beotime.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-5.png Beosound-5.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoplay-Portal.png Beoplay-Portal.png
Beoplay-Earset.png Beoplay-Earset.png
Beomaster.png Beomaster.png
Beolit.png Beolit.png
Beogram-400x.png Beogram-400x.png
Beocenter-2.png Beocenter-2.png

ChrDH wrote:

Any B&O dealer can provide you with Powerlink Cables. As far as I know, they have to be fully wired (Powerlink MK3 cables I suppose they are called?) to also send a signal to the displays of the Penta, anyone please correct me if I am wrong.

Christian

No!!!

 

Speakers with displays require Mk2 Powerlinks.

Hi Tom, welcome to Beowolrd.

congratulations on your new toys. The penta's are fine speakers and finding some at reasonable price and in good condition is very hard.
As a fellow North American I know all about how hard it is to find B&O items second hand. Ebay sometimes being your best bet.

I do think they need powerlink MK2 cables , but just ask your B&O dealer and he can even order some for you.

Regards

 

 

Thanks Christian.  There is not a dealer very close to me, but if necessary, I can locate one and maybe have them shipped.  Thanks for your kind words.  Tom

Hi Peter,  It's been a little while since I have been on BeoWorld, as I have benn searching for so long for a pair of P3's, with little success.  Now that I have kinda settled for a pair of P2's, it was time to jump back into the fold.  Was I right on my switch settings using the Speaker link cables?

I hope things have been going well for you.

Regards,

Tom

Hi Cooldude (not sure what your real name is),

Many thanks on my "Welcome to Beoworld", but if you check my "member since date", I have actually been a member of BeoWorld longer than you.  And actually, I have been a member long before my date indicates, as I lost my old registration when they upgraded to the new website.  I just don't have the opportunity to participate as aften as I would like, but your sentiments are much appreciated!

I checked eBay last night and only found one person selling P-link cables, but they did not indicate which variety they were, Mk1, Mk2, or Mk3.  I also thought the price was kind of a rip-off (and how can it cost 12 bucks to ship a cable that weights less than 12 ounces?  I hate that in an eBay seller).  I'll keep looking and also find out more about the differences between the cble types.

Thanks again for your kindness, Tom.

Many thanks Graham.  I kinda figured out that I needed Mk2's, but I was looking for an article, tech review or thread which spoke of the differences between the various cables and couldn't find any.  Although I'm sure one has been written at one time or another, probably by "you" of all people!  Anyway, is it possible to quickly or simply identify the differences in these cable and why?

Again, thanks for your perfectly succint reply.

Tom

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.