PCB 24 on Penta II

6 replies
HP
Offline
HP
Bronze
Posted April 22, 2008 at 15:16 GMT
#1841290

Hi guys...

 On the...on the PCB 24 on the penta II....the P114 goes up to the jumper and on to P113-6 audio/video switch..

Which 2 legs is this jumper supposed to be between....???

THe displays are not working as of yet....

thanks !!!

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted April 22, 2008 at 15:31 GMT
#1841291

Frank,

Do you mean J2 which is between P113 pin 5 and R26 ?

P114 does not go to a jumper, but it goes directly to P113 pin 6

Location: Hampshire, England

HP
Offline
HP
Bronze
Posted April 22, 2008 at 15:38 GMT
#1841292

ahh....just to the right of that on page 2-3...the P114 from R47 up to P113-6...

I beleive is the one in question...there are 3 legs down...and the tech tells me that there is a jumper between 2 of the legs...

 thanks Keith !!

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted April 22, 2008 at 15:55 GMT
#1841293

Below is the circuit you are looking at

Location: Hampshire, England

HP
Offline
HP
Bronze
Posted April 22, 2008 at 16:09 GMT
#1841294
Exactly Keith !!  so is there supposed to be a jumper there on the P114?? cause there is on these speakers..
Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted April 23, 2008 at 02:41 GMT
#1841295
The jumper is intended to be in place, its removed for test purposes only.

Location: Hampshire, England

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold