probably an option problem, you will have toreset it bl1000

press standbyand sound together

then press 1

then press storeshould work then I had a similar problem

if it doesn't the try above with either 0 or 2 one of which will work

sorry cannot remember the correct option mode but it is one of the above

!salut

tony

Hi thanks for the reply,

do i do this using the beo4 or on the Ouverture because i dont have any buttons saying standby or sound?

Haaaaaa!!!!!!!!!

Don't know how to do it with a beo4 but yes its remote base

try pressing list until optin appears press go scroll thro to audio press go press0 1 or 2then go - i think thats it otherwise do a search on the site for option setting

I always use my bl 1000 as its dead simple!

t

now found my book, it goes

hold standby buttonwhilst pressing list, scvroll to options press go

press list until a optthen hkey 1

should then be fine

t

Cant get that to work!! any other options?

now found my book, it goes

hold standby button whilst pressing list - ie at same time - , scvroll to options    press go

press list until a opt  then key 1

try pressing   go

should then be fine

sorry about the mistakes etc my keyboard is on it way out and i cannot get a qwerty kybd in france they us ethe quaint old azerty`layout

t

HI thanks for the help but it doesn't work! it must be another problem with the thing!!

harrykym wrote:

Is there a reset button?

Wouldn't hurt to unplug it and leave it unplugged for several hours.

No matter in what option the BeoSound Ouverture is programmed, it should always work using the keyboard on the Ouverture itself. Sometimes a key on the keyboard gets stuck between the surrounding metal on the keyboard, keeping the key pressed. But in that case the doors also will not close, because when a key is pushed the Ouverture won't close the doors to  protect the fingers of the user. It could also be a problem in the Ouverture.

According to the chap I bought it from, the Ouverture as been in storage for the last 2 years and not used. Could this be the problem? ie damp?