Network link for in wall speakers

7 replies
EX
Offline
Expoman
Bronze
Posted December 2, 2021 at 05:15 GMT
#2161212

Is it possible to build a module to add on to a BEOLINK Passive amplifier to make it a network link zone?  I was wondering if there is a part from a Beosound 35 that could be modified?

carolpa
Offline
carolpa
Bronze
Posted December 2, 2021 at 05:39 GMT
#2161213
expoman wrote:

Is it possible to build a module to add on to a BEOLINK Passive amplifier to make it a network link zone? I was wondering if there is a part from a Beosound 35 that could be modified?

Beosound Essence mkII

BeoLink NL/ML converter
carolpa
Offline
carolpa
Bronze
Posted December 2, 2021 at 05:42 GMT
#2161214
Carolpa wrote:

Beosound Essence mkII

BeoLink NL/ML converter

And Beosound Core 😕
AK
Offline
akoitidis
Bronze
Posted December 2, 2021 at 06:08 GMT
#2161215

Hello expoman,

I am using both nl/ml converter and beosound essence mkii in a setup to drive two pairs of beovox cx100. The setup is super easy and it works like a charm! Only down side is that you need quite some space to put all this stuff and cables. Especially with the nl/ml converter which is much bigger than the essence and much much bigger than the core (as carolpa suggested) and it has no bluetooth connection to a remote (in case you don't want to control it only from your phone/tablet).

C(
Offline
chucky (archived2)
Bronze
Posted December 2, 2021 at 06:55 GMT
#2161216
I got 3 sollutions 1 in a kidsroom with BV3000 beoamp and a core and a V1

1 in the bathroom with bV1 core and beoamp

1 in the shed BV1 and beoamp

The shed is a bit tricky. Before I used a ml/mcl and passive, works also fine but the sound is worse.

There is a delay between the core and the shed of almost 10 seconds before you here sound. It has to do with the length of cable. It is synchronised but it takes a litle time to hear sound.

Bv = Beovox

Kr Chucky
EX
Offline
Expoman
Bronze
Posted December 2, 2021 at 15:55 GMT
#2161217

So a Core with power link out would activate the passive amp and give you volume control with a Bluetooth remote.  This would be the simplest solution right?

carolpa
Offline
carolpa
Bronze
Posted December 2, 2021 at 17:35 GMT
#2161218

expoman wrote:
So a Core with power link out would activate the passive amp and give you volume control with a Bluetooth remote.  This would be the simplest solution right?
Right

expoman wrote:
control with a Bluetooth remote.
or use the B&o app.

 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold