My B&O Home

895 replies
......
KI
Offline
kirangohel
Gold
Posted April 5, 2017 at 16:28 GMT
#2081840
fedenunez wrote:

Did you try with the BeoLink App 1?

Can you share your BLGW configuration?

I just realised you may be right about the sources in the interface tab in the blgw. I will check that when I get home.

All I did was added the NL/ML to the zone. I just realised I captured all the sources for the other equipment when I initially set it up a few days ago.

Thanks for the heads up 👍🏻💯

I will update you shortly.

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Avant.png Beovision-Avant.png
Beosound.png Beosound.png
Beosound-Moment.png Beosound-Moment.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beosound-9000.png Beosound-9000.png
Beosound-5.png Beosound-5.png
Beosound-4.png Beosound-4.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-A1.png Beoplay-A1.png
Beolab-18.png Beolab-18.png
Beocenter-2.png Beocenter-2.png
KI
Offline
kirangohel
Gold
Posted April 5, 2017 at 20:22 GMT
#2081841
fedenunez wrote:

Did you try with the BeoLink App 1?

Can you share your BLGW configuration?

Hi Fedenunez

Thanks for your help.

Because I am using the speakers for the BLC through the NL Avant in an integrated setup, the sources have been hidden to choose in the blgw. They can only be chosen from the TV. See picture below.

I had to scroll down and "unhide" the sources in the TV's interface.

I now have full control. 🍕

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Avant.png Beovision-Avant.png
Beosound.png Beosound.png
Beosound-Moment.png Beosound-Moment.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beosound-9000.png Beosound-9000.png
Beosound-5.png Beosound-5.png
Beosound-4.png Beosound-4.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-A1.png Beoplay-A1.png
Beolab-18.png Beolab-18.png
Beocenter-2.png Beocenter-2.png
F(
Offline
fedenunez (archived2)
Bronze
Posted April 5, 2017 at 23:39 GMT
#2081842

You are welcome!

 

KI
Offline
kirangohel
Gold
Posted April 6, 2017 at 12:18 GMT
#2081843
Progress...

There are too many pillars. We're getting rid of some...

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Avant.png Beovision-Avant.png
Beosound.png Beosound.png
Beosound-Moment.png Beosound-Moment.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beosound-9000.png Beosound-9000.png
Beosound-5.png Beosound-5.png
Beosound-4.png Beosound-4.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-A1.png Beoplay-A1.png
Beolab-18.png Beolab-18.png
Beocenter-2.png Beocenter-2.png
KI
Offline
kirangohel
Gold
Posted April 6, 2017 at 19:00 GMT
#2081844
I prefer the Beolink2 app. It's very well done 👍🏻

It would be nice to see both icons of the Avant and BS9000 though like the BeoMusic app.

Beolink2:

BeoMusic:

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Avant.png Beovision-Avant.png
Beosound.png Beosound.png
Beosound-Moment.png Beosound-Moment.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beosound-9000.png Beosound-9000.png
Beosound-5.png Beosound-5.png
Beosound-4.png Beosound-4.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-A1.png Beoplay-A1.png
Beolab-18.png Beolab-18.png
Beocenter-2.png Beocenter-2.png
KI
Offline
kirangohel
Gold
Posted April 6, 2017 at 23:15 GMT
#2081845
The BLC icon shows up when the Avant is standby 👍🏻

Kitchen should be the Beosound 2 icon but that's not working in the app so far.

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Avant.png Beovision-Avant.png
Beosound.png Beosound.png
Beosound-Moment.png Beosound-Moment.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beosound-9000.png Beosound-9000.png
Beosound-5.png Beosound-5.png
Beosound-4.png Beosound-4.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-A1.png Beoplay-A1.png
Beolab-18.png Beolab-18.png
Beocenter-2.png Beocenter-2.png
KI
Offline
kirangohel
Gold
Posted April 9, 2017 at 11:33 GMT
#2081846
Hi All

I currently have 2 Nest thermostats. Upstairs and downstairs.

I have integrated this in the blgw temporarily until the Heatmiser Neohub gets installed.

I can only assign the Nest thermostat to one zone so I have made extra zones downstairs and upstairs.

Is it possible to assign the downstairs thermostat to all downstairs zones? And the same for upstairs?

Can anyone please advise. Thank you.

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Avant.png Beovision-Avant.png
Beosound.png Beosound.png
Beosound-Moment.png Beosound-Moment.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beosound-9000.png Beosound-9000.png
Beosound-5.png Beosound-5.png
Beosound-4.png Beosound-4.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-A1.png Beoplay-A1.png
Beolab-18.png Beolab-18.png
Beocenter-2.png Beocenter-2.png
KI
Offline
kirangohel
Gold
Posted April 9, 2017 at 11:36 GMT
#2081847
Progress...

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Avant.png Beovision-Avant.png
Beosound.png Beosound.png
Beosound-Moment.png Beosound-Moment.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beosound-9000.png Beosound-9000.png
Beosound-5.png Beosound-5.png
Beosound-4.png Beosound-4.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-A1.png Beoplay-A1.png
Beolab-18.png Beolab-18.png
Beocenter-2.png Beocenter-2.png
KI
Offline
kirangohel
Gold
Posted April 13, 2017 at 16:28 GMT
#2081848
Progress...

Pillars have come down.

Steel beams in place.

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Avant.png Beovision-Avant.png
Beosound.png Beosound.png
Beosound-Moment.png Beosound-Moment.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beosound-9000.png Beosound-9000.png
Beosound-5.png Beosound-5.png
Beosound-4.png Beosound-4.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-A1.png Beoplay-A1.png
Beolab-18.png Beolab-18.png
Beocenter-2.png Beocenter-2.png
D(
Offline
Duels (archived2)
Bronze
Posted April 13, 2017 at 16:59 GMT
#2081849
Kiran wrote:

Progress...

Pillars have come down.

Steel beams in place.

Regards

Kiran

Born in NL; I ride ML

That looks better without the pillars. Coming in nicely Kiran.
......
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold