Motorised stands settings

8 replies
A(
Offline
applemac1 (archived)
Bronze
Posted March 23, 2010 at 15:36 GMT
#1904350

I have a beovision avant 32 inche tv, and can not get the stand to set correctly. What Im trying to do is have the TV set to be directly face on when turning the tv on and off.  The positions I have set at at the moment are as below, and when i turn the tv off it goes to the far left. Now I have changed the positions around and yet no matter what position I set the TV it always switches off to the far left position. Does anyone have any ideas how to solve this?

Set at the moment

0    set to facing direct

1    set to far left

2    set to far right

 

B(
Offline
burantek (archived)
Bronze
Posted March 23, 2010 at 15:58 GMT
#1904351

Those values seem confusing to me... but I have US (8490) models, where...

1 FAR LEFT

5 CENTER

9 FAR RIGHT

I would ensure the Avant is centered physically... in my case (5) so that you then know where "CENTER" is...

Then, position the set appropriately for your room.

In the (8490) the STDBY and ON positions are programmed in the menu.

A(
Offline
applemac1 (archived)
Bronze
Posted March 23, 2010 at 17:31 GMT
#1904352

Its because mine is a european model. Am I right in saying that on yours 5 is also the standby position also ?

NO
Offline
Nonalphanumeric
Bronze
Posted March 23, 2010 at 22:58 GMT
#1904353

Standby is the position you set 0 as, mr "applemac1"

J(
Offline
jandyt (archived)
Bronze
Posted March 24, 2010 at 05:08 GMT
#1904354

Seems you are confused like me Dave.😕

Put the Avant where you want it to park up at night, and store it as  '0'
Put the Avant where you want it to be when switched on, and store it as  '1'

Simples!

A(
Offline
applemac1 (archived)
Bronze
Posted March 24, 2010 at 07:00 GMT
#1904355

Ah maybe this will help, what I want is a stanby park position set the same as the switched on position, then I wanted to use the other two positions one for far left and the other for far right, However from what I understand from your message is, if 0 is set to park then the tv will always when switched on go to position 1.

J(
Offline
jandyt (archived)
Bronze
Posted March 24, 2010 at 09:42 GMT
#1904356

Correct!  So store that position as '0' and as '1'.
Problem is, that there is only one more saved position available.

Andy T.

A(
Offline
applemac1 (archived)
Bronze
Posted March 24, 2010 at 11:15 GMT
#1904357

Ah great solves my problems thanks.

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold