I assume that your Airport is connected to AUX on the BS3200.

Could it be that when you press AUX, it turns on the MX4000 AUX input.

I have not ever had this exact setup, but maybe you could try pressing AV button followed by AUX. 

/MikaelB

hi mikael,

thanks for your reply. indeed my airport express is connected to the AUX of the BS3200. tried AV followed by AUX, nothing. nothing happens when i press the actual AUX button on the BS3200...

Hi,

Have you tried A.AUX on your remote ?

Are you sure that options are set correctly ? (if radio and cd works, should be ok)

Sure, your source is connected to A.AUX not PowerLink ?

Try to increase volume on your Apple ?

If won't help, reconnect whole system.

regards,

Michael

yes i did try A.AUX, same result.

i actually think it has to do with the options, but i tried a lot of combinations, none of them work correctly. apple is connected correctly for sure, as soon as i connect my BL6000 to the BS3200 everything works fine, except that i cant get the sound of the TV then. 

but maybe this would be the correct way to do this? connect the speakers to the BS3200 and link to the MX4000? but what would be the correct option programming then?

cheers and thanks again

tom

Assuming your BS3200 and MX400 are masterlinked with a 1615 Beolink Video converter , connect the BL6000 to the audio system and try A.OPT 1 and V.OPT 1. This should let your BS3200 and BL6000 start up when pressing RADIO CD, A.AUX.... Choosing a video source - TV, DTV, DVD...- will activate the Beovision - BS3200 will stay off (standby). If you want to watch TV with sound on BL6000 just press AV - TV (DTV...).

Hope this helps.

Stefan