IR Eye -> Cable

4 replies
R(
Offline
root (archived)
Bronze
Posted June 9, 2010 at 07:50 GMT
#1910053

I just got a Beovision 4 with Beosystem 2 and now need to screw the cable to the IR eye.

In the setup manual is a different IR eye with 8 screws, I got one with only 5 screws.

The IR cable has only green-brown-yellow, so what to do?

stefan
Offline
stefan
BronzeFounder
Posted June 9, 2010 at 08:40 GMT
#1910054

Yellow = 5V

Green = IR Data

Brown = Sense .....or is it black (?) = ground

Hope this helps

Stefan

M(
Offline
matbkk (archived)
Bronze
Posted June 11, 2010 at 04:30 GMT
#1910055

Hi

I just made it few feews ago and took a picture of the wiring, it works so it should help you.

link

R(
Offline
root (archived)
Bronze
Posted June 12, 2010 at 11:02 GMT
#1910056

OK this is what I did:

So since there are only 3 wires in the BS2-IR-cable: yellow, green, and brown, I only connected these three as shown in the Beolink Passive manual.

This caused some problems, the Beosystem 2 was changing the channels sometimes accidentaly, very strange.

changed the wires now so it matches the picture that matbkk posted, hope it will solve that problems (for the moment it does, but you never know...)

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold