Help please with Beocenter 7007

14 replies
M(
Offline
mikeywxm (archived2)
Bronze
Posted December 7, 2016 at 15:32 GMT
#2073629

Hello,

Sorry bear with me, this is my first post and I'm a complete novice. I'm very new to the B&O world and have within the last few months purchased a Beocenter 7007. I absolutely love everything about it.

Recently I sent my MMC4 off for repair to Beovintage in Denmark, whilst waiting on its return i have decided to realign the right hand side top panel as it was catching on the release bar. So last night i removed all parts attached and cleaned them up. When i came to putting it all back together i have struggled with installing the spring bar. Can anyone please advise me on how this is done or if you have some pictures that would be great.

Thanks,

Mike

 

M(
Offline
mikeywxm (archived2)
Bronze
Posted December 7, 2016 at 21:25 GMT
#2073630

Anyone? please.

Peter
Offline
Peter
Gold
Posted December 7, 2016 at 21:38 GMT
#2073631

Lovely Beocenter by the way - one of the best!

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beovision-11.png Beovision-11.png
Beotime.png Beotime.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-5.png Beosound-5.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoplay-Portal.png Beoplay-Portal.png
Beoplay-Earset.png Beoplay-Earset.png
Beomaster.png Beomaster.png
Beolit.png Beolit.png
Beogram-400x.png Beogram-400x.png
Beocenter-2.png Beocenter-2.png
M(
Offline
mikeywxm (archived2)
Bronze
Posted December 7, 2016 at 22:06 GMT
#2073632

Thanks Peter. I'll have a go after work tomorrow.

Thanks

Mike

Beobuddy
Offline
Beobuddy
BronzeFounder
Posted December 7, 2016 at 22:29 GMT
#2073633

Wrench or better pliers. 

Location: Utrecht

Quite a challenge to achieve "Less is More" while having the Beovirus.
M(
Offline
mikeywxm (archived2)
Bronze
Posted December 8, 2016 at 10:17 GMT
#2073634

Thanks Beobuddy, I’ll give it ago tonight along with the help of Peter's schematic.

M(
Offline
mikeywxm (archived2)
Bronze
Posted December 8, 2016 at 23:11 GMT
#2073635

So following the advice from Peter and Beobuddy I've managed to get it all back together and squared up. Only took a few minutes and was fairly easy. Once I connected everything back into its position and left the straight bend out(right hand side looking from the rear) I lifted the lid and pushed the bar with my finger into its position giving the spring tension once again. Really simple after a bit of helpful advice. 

Thanks again👍🏻

T(
Offline
taradict (archived2)
Bronze
Posted April 6, 2017 at 21:10 GMT
#2073636

Hi Peter,

do you have the complete picture of this attached...

It will be very very cool!

Thanks

Peter
Offline
Peter
Gold
Posted April 6, 2017 at 22:01 GMT
#2073637

No longer have one of these I am afraid. No doubt someone will though.

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beovision-11.png Beovision-11.png
Beotime.png Beotime.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-5.png Beosound-5.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoplay-Portal.png Beoplay-Portal.png
Beoplay-Earset.png Beoplay-Earset.png
Beomaster.png Beomaster.png
Beolit.png Beolit.png
Beogram-400x.png Beogram-400x.png
Beocenter-2.png Beocenter-2.png
T(
Offline
Travisthedog (archived2)
Bronze
Posted April 16, 2021 at 11:14 GMT
#2073638

Hi 

Same problem here - I know this is an old thread. What is the significance of the 2 (I may now only have one) tiny little squares of plastic on the back of the  hinge mechanism 

Also am I right in thinking that you bolt it all back together and then put the spring bar back in?

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold