Hello,
One of my Beosound essence remotes suffered from a battery leak and stopped working. The only solution I could find in order to clean it thoroughly and try to fix it, was to open it up, and since I could not find any proper documentation on this, I decided to post my findings.
Disclaimer, I don't know what Im doing, I probably suck at doing this, and there's got to be a better way of doing it, I have nothing to lose, worst case I will use what is left as spare parts for the other remotes I have. this is post is only for futur referencing.
1/Remove the cover plate / label whatever you want to call it. I used some pretty strong double sided tape and pulled way too hard, the whole assembly came off and broke 4 black plastic tabs that are screwed to the remote. Then I separated the black support from the cover plate with a razor blade, very very very gently.
One of my Beosound essence remotes suffered from a battery leak and stopped working. The only solution I could find in order to clean it thoroughly and try to fix it, was to open it up, and since I could not find any proper documentation on this, I decided to post my findings.
Disclaimer, I don't know what Im doing, I probably suck at doing this, and there's got to be a better way of doing it, I have nothing to lose, worst case I will use what is left as spare parts for the other remotes I have. this is post is only for futur referencing.
1/Remove the cover plate / label whatever you want to call it. I used some pretty strong double sided tape and pulled way too hard, the whole assembly came off and broke 4 black plastic tabs that are screwed to the remote. Then I separated the black support from the cover plate with a razor blade, very very very gently.
Location: Düsseldorf
My B&O Icons:
