Hi,

You don't say where you are but if you mean UK plugs you just need these

Welcome to Beoworld.  You say they already come with adapters so you can just keep them as they are and use the adapters, or, if you really feel the need to, you can cut the 2 pin EU plugs off and wire them into a UK 3 pin plug.  The EU lead only has 2 wires, live and neautral (brown and blue).  There is no Earth wire.

Good call with Steve at Sounds Heavenly - the best supplier to use.

Taking frets off the Pentas can be fiddly.  It took me ages to get mine off for recovering the frets!  The clips were so tight that I had to use a blunt, flat blade scraper between the trim and fret to help get them off.  Once it starts, the rest are easier.

Dave.

Another tip if you want to check the drivers, use a torch (I used my iphone light) through the frets and you'll see them easily!

Hi dave

Yes frets are very hard to get off....i dare not try

Im a little confused as when cleaning i have come across a date on the amp of 1988

But label under neath shows model 6631..also i have a speaker link, two powerlinks and a line in connector........1988 would mean penta mk1 but model 6631 is penta mk3 i beleive as are the connectors ( i think ) are you able a clarify ??

Thanks gary

The "1988" is the copyright year of the design. Ignore that. Type 6631 is Mk.3.