Connecting a sub (BL2) to BM5

5 replies

Hi

Today I have a pair of BL3's connected to my BM5/BS5, and I am considering to add a sub (BL2) to my BM5. If I connect the sub to the second PL connector in the BM5 unit, how would the speakers know what frequencies to support? In other words, how does the BL3's knows that there is a BL2 connected that takes care of all lower frequencies?
I guess you normally would connect the BL3 to the PL Out of the BL2, but I can not (easy) do this due to very special placement of the speakers (and cables).

Or am I thinking of the problem that does not exist at all?

Thanks in advance.

Regards

 

 

 

beolion wrote:
In other words, how does the BL3's knows that there is a BL2 connected that
takes care of all lower frequencies?

Without looping through the BLB2 they won't know.

beolion wrote:
I guess you normally would connect the BL3 to the PL Out of the BL2, but I can not
(easy) do this due to very special placement of the speakers (and cables).

You need to run 2 PL-cables between BM5 and BLB2: "send" + "return" + PL-splitter. 

BM 5 PL out >> PL-cable >> BLB 2 IN >> BLB 2 OUT >> PL-cable towards your existing PL-cables
>> PL Splitter >> existing cables to the BLB3s

 

If I have to go thru the BL2, then the cable length from the BL2 to the BL3's will be about 16 meters, will that cause a "delay" in the sound?

The delay will be about 0,000003ms if i have done my math right. In others words, you will experience absolutely no delay 🙂

Thanks a lot for the reply, then there should not be a problem for mere her 🙂

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.