thanks, but it does NOT work in my case ;-(

any other idea?

thanks

ts

What D-Box software do you use (Neutrino/Enigma)?

There should be a system setting, audio/sound - use ac3 default output...

Ralf

In that case you probably don't have a SPdif signal (I presume you connected the right input) 

 Check if the box is indeed sendig optical SPdif  (you see a led flashing), if so check if there is an electrical spdif signal (see wikipedia how to do that)

succes

the box sends an optical signal => i can see thee red light.. When it is true, that the BV7 notices when there is an electical signal the problem has to be with the transformer or the electrical cable. can you give me a link where i can read how to check if there is an/ the right electrical signal? i have searched for it but nothing found...

thanks a lot

TS

Just to double check: at the moment you get no sound at all while chosing a tv station that is sending ac3?

If you still hear sound, it is stereo only and your box is not set to AC3 - see my post above.

Ralf

Danke für den Tipp Ralf, leider wird bei der Umschaltung an der Box auf AC3 der Ton am TV ausgeschaltet ;-(

Nur über den Scart-Anschluss wird Ton, dann aber leider nur 2-Kanal, über den BV7 ausgegeben. Über den elektrischen S/P dif-Eingang des BV7 kommt bei Umschaltung der Box auf AC3 - damit optischer Ausgang der Box mit AC3- leider nichts an..

Gruß
TS