Beovision 7 stand screws

10 replies

Offline

Arthur Vink

Bronze

Posted September 8, 2025 at 18:23 GMT

Hi,

anyone have the measurements or type number of the bolts needed to secure a beovision 7-40 to the table stand?

Pictured is the wall bracket but idea is the same

thanks so much

Attachments (1)

Location: Netherlands

My B&O Icons:

Beocenter 9500, Beogram 9500 mmc4, beolab 9, beolink 7000, beovision 7-40mk5

Online

Tignum

Gold

1008 posts

Posted September 8, 2025 at 22:09 GMT

#1671045

Hello Arthur, The screws to secure the TV to the bracket (4) are M5 x 20:

In your image there is another position indicated. So I hope this helps!

Regards, Johan

Location: Netherlands

My B&O Icons:

Online

Tignum

Gold

1008 posts

Posted September 9, 2025 at 07:26 GMT

#1671047

Something like this:

The head diameter is 8.3mm.

Location: Netherlands

My B&O Icons:

Offline

Arthur Vink

Bronze

8 posts

Posted September 9, 2025 at 08:36 GMT

#1671049

Thanks guys! Needs a clean and proper installation with cables etc but it’s a start 😁

Attachments (1)

Location: Netherlands

My B&O Icons:

Beocenter 9500, Beogram 9500 mmc4, beolab 9, beolink 7000, beovision 7-40mk5

Offline

pepps

GoldModerator

475 posts

Posted September 9, 2025 at 10:10 GMT

#1671054

I love the tabletop stand with the BV7. Because it tilts up it looks so cool when it's woken up 😎

I'm reminded of James Bond when he plays back M's video message to Moneypenny in his London flat in Spectre. His (Sony - pah!) tv is mounted very low and looks very slick.

I used to have my BV7-32 on the floor but on the table stand when I was a Beobachelor 😄

Location: Kent, UK

My B&O Icons:

Beofan for many years with a penchant for 1990s audio systems.

Online

Tignum

Gold

1008 posts

Posted September 9, 2025 at 18:39 GMT

#1671058

Looking good, must sound fantastic with the BL9s. The tilting is indeed quite a special feature of the 7-40 stands (I admit to have modded a 7-40 wall bracket for my 7-32 once).

I always found it an interesting choice of B&O to make the BeoLab 7-1/2/6 slightly different in width than the TV sets!

Regards, Johan

Location: Netherlands

My B&O Icons:

Offline

Arthur Vink

Bronze

8 posts

Posted September 11, 2025 at 20:37 GMT

#1671087

Thanks for the comments guys! You have a suggestion for the settings of the speakers? Suurround L+R or Front L+R?

Location: Netherlands

My B&O Icons:

Beocenter 9500, Beogram 9500 mmc4, beolab 9, beolink 7000, beovision 7-40mk5

Online

Tignum

Gold

1008 posts

Posted September 12, 2025 at 18:40 GMT

#1671102

Hi, The manual says:

But I trust that you can only select surround speakers after you have selected front speakers, and rears after you have selected front + surround.

Don't forget to set volume levels and speaker distances. And enjoy!

Location: Netherlands

My B&O Icons:

Offline

Arthur Vink

Bronze

8 posts

Posted September 13, 2025 at 19:59 GMT

#1671119

Alright thanks!!

final question;

ive put a 1611 converter between the BC9500 and beovision, with the beolabs connected to the BV7.

I’m trying to use a beolink7000 to control the audio sources and volume. However, if I press CD on the 7000, the beocenter wakes up but the beovision doesnt. The beovision does wake up with a beo4 if I press CD.

When playing a CD, if I select a track on the beolink7000, it does go from track 1 to track 4. The display on the beovision changes to CD4. But then I cannot controle volume with beolink7000, but it can control volume with the beo4. If I turn off the beocenter with the beolink7000, the beovision also turns off (??)

Beovision and beocenter are both in A.opt2 and V.opt2, would that be the problem?

Thanks in advance

Location: Netherlands

My B&O Icons:

Beocenter 9500, Beogram 9500 mmc4, beolab 9, beolink 7000, beovision 7-40mk5

Offline

pepps

GoldModerator

475 posts

Posted September 13, 2025 at 21:03 GMT
Edited September 13, 2025 at 21:06 GMT

#1671124

Hello. With my set-up (BV7 & Beosystem 6500 with Beolink converter) I have the Beomaster in Op 0 (zero) and BV in Op 2.

I'm not sure if your Beolink 7000 can talk to the BV so you may want to stick with the Beo4 for films/tv watching and controlling your 9500. It'll all work via the BV.

Location: Kent, UK

My B&O Icons:

Beofan for many years with a penchant for 1990s audio systems.

Join BeoWorld

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold

Beovision 7 stand screws

Arthur Vink

Tignum

Tignum

Arthur Vink

pepps

Tignum

Arthur Vink

Tignum

Arthur Vink

pepps

Please Log In to Reply

Join BeoWorld

December 2026 Prize Draw