Reg,

Given your feedback, then I regret to inform you that you almost certainly have one of the most common Beovision 1 faults.

You will need to contact your B&O dealer because the most likely problem will be the microprocessor and/or eeprom.

Keith, Many thanks for the information.  My wife has asked if you have an idea of the potential cost as we have now sat down with a cup of tea to brace ourselves.  Of course I shall contact my dealer but the way forward would give us something to talk about this evening!

Best wishes, Reg.  

Hi Reg,

Not sure if you saw my response to your message, but please get in contact and I can take a look at it for you.

Be prepared for the main dealers to charge you £50 to remove the back before they even look at it.

Regards, Neil

I'm with Keith here. If the stanby led don't blink, when you program option. it's the microprocessor and eeprom.  

Gentlemen, you are correct ... the Processor/Eprom is shot.  I have just got it up and running now with a spare.

Neil

Cheers Neil, you're a gem! 

Hi Reg,

Did you get my email?

Give me a call when convenient.

Cheers, Neil