Thank you, will try that tomorrow! And btw: no speakers will be connected to neither BS9000 nor BLC… …I do have Beoplay A9 and Beosound Stage on NL that I plan to use as speakers. 😕

An added complication is that you bs9000 will be in A.Opt 0 with no speakers connected so you may need an it eye for your blc? I believe there is a dummy plug available to fool the bs9000 into thinking speakers are connected 

Hi, in my view there is no need for an extra IR eye. The CD source of the BS9000 will be made available in the NL system (experience mapped to NL) by the BLC, and CD related commands sent to the A9 or Stage will be translated to control the BS9000 by the BLC.

I would say that when you set the BLC to be an Audio Slave, you only map CD as an experience to NL. See page 14 of the BeoLink Converter NLML (ver 1.4) manual.

I do a similar thing with my BeoGram CD7000 (through BeoMaster 6500 and a BeoLink (MCL) converter) to get the CD playing on NL. All with help from kind people on the forum :-).

Hope you can get it working!

Regards,

Johan

Good point - I’m still in the mindset of connecting Ebola s to something! Ignore me!

Thank you all guys, this is so kind of you, I will send a "happy" message here once I get it to work (plays CDs). 😕

Everything works thanks to your kind help. 🤩 "Speakerless" BS 9000 connected to BLC streams in multiroom to BS Stage and Beoplay A9! 😁

Next step: BLI and integration into Beoremote Halo. 😐

Would you mind sharing your working setup?
Mine is similar to yours, BS9000 Mk2 + BLC ML/NL + BL28 + BS2

I have tried the suggestions in this thread, but the B&O app keeps saying “play something on BeoSound9000 to add speakers to this group” (Beosound9000 is the name of th ML/NL)

Thanks