Millemissen wrote:

I wrote pre-BSys4 - and that is what I meant!!!

It was part of the discussion, if the new PUC's could be used on those devices - and in this way benefit from some of the new buttons.

You say, that they can't.

That ends the discussion, and - as I wrote - probably no one would update them anyway...because of the costs.

MM

Fair enough that you want to end the discussion here, I just tried to help :P
I am just stating that V1 and BV11 have been released prior to BSys4 and therefore "pre-BSys4" is a bit inaccurate if you want to include V1 and BV11), but yeah, lets not beat this horse to death. :)

Millemissen wrote:

That is because you can configure the One to react so!

It either uses the same code and all the TVs would react at the same time... or it doesn't use the same code. When not emulating a Beo4, it seems it uses a new set of code.

I'll eat my shorts if they should have used the oldfashioned ROM.

No one does that anymore - it wasn't done with the latest Beo4's, so why with the BeOne?

If the software is buggy, that needs to be fixed.

Question is, can a dealer do that, or can that only be done in Struer (or the Czech factory) - like with the latest Beo4's?

MM

PapaJustify wrote:

Fair enough that you want to end the discussion here, I just tried to help :P
I am just stating that V1 and BV11 have been released prior to BSys4 and therefore "pre-BSys4" is a bit inaccurate if you want to include V1 and BV11), but yeah, lets not beat this horse to death. :)

BSys4 is the term used for the engine in V1/BV11 and of course in the standalone BeoSystem4.

So - no beating of the horse....as long as we understand each other.

MM

PapaJustify wrote:

Fair enough that you want to end the discussion here, I just tried to help :P

I am just stating that V1 and BV11 have been released prior to BSys4 and therefore "pre-BSys4" is a bit inaccurate if you want to include V1 and BV11), but yeah, lets not beat this horse to death. :)

I think as often here, we're arguing for nothing as we mean the same thing but use different wording. I for myself consider the v1 and bv11 to Bsys 4 based even though they were released before the actual bsys4 standalone box.

Also bsys 3 was also a video engine.

Pardon me - I should have written pre-BSys4 based tv's 🙁

M🙂M

I think you can't update BeoRemote One by yourself, because it has no access to internet and no connection to join with a PC.

In the last few years many new commands had been added to Beo4 (Apple TV, Youtube) or commands had been renamed (Phone, Doorcam). It's for sure that there will be new commands needed in future, so it's a good question if at least dealers will be able to update the software of BeoRemote One quick and easy.

Greets

Räuber

Millemissen wrote:

Pardon me - I should have written pre-BSys4 based tv's

M M

There is a tv - and there is a BV.

I think these pre-BSys4 based TVs (BV 7, 10 ...) can use the three MyButtons, but only to select a source. The INFO and GUIDE buttons will not work. So says the manual. The only question is if the INFO and GUIDE buttons will work for PUC-controlled devices. If so, the PUC tables of these TVs need an update by dealers.

The BSys4 based TVs (V1, BV 11) will need a software update for working with BeoRemote One like the new Avant. Also the PUC tables. But both updates can be done by yourself.

Räuber

Raeuber wrote:

The only question is if the INFO and GUIDE buttons will work for PUC-controlled devices. If so, the PUC tables of these TVs need an update by dealers.

No, they won't. Not on those "pre-Bsys4" TVs.

PapaJustify wrote:

No, they won't. Not on those "pre-Bsys4" TVs.

I suppose the same. With these TVs the INFO and GUIDE buttons will be 'dead for ever'.