Thank you to our Sponsors
Well my Beomaster 3300 Remote has never worked and finally got around to taking the back panel off and found out why looks like someone must have hit it and snaped it off when putting the back panel back on. any ideas of the best way to go about fixing this any help would be greatly appreciated here are some pics of the problem.
[View:http://archivedforum2.beoworld.org/themes/hawaii/utility/:550:0]
[View:http://archivedforum2.beoworld.org/themes/hawaii/utility/:550:0]
Location: Texas
Well, those pictures aren't the sharpest ones 😕
That's the way it should look like:
So at least the IR Diode is missing - not mentioning the broken part of the PCB.
IR Diode is a BPW82.
Gunther
Yes sadly didnt have my camera with me had to use the cell phone camera pics look so much better on the nice 4 inch screen lol 😳
Thank you for the diode part number now i just gotta figure out how to rig it up to work with the missing part of the PCB board. have replaced caps lights etc but never ir diode with missing board this will be a first to figure out.
Location: Texas
I have a spare IR board (module 4) in stock, used but intact.
Martin
do you happen to have a pic of it sadly im not 100% what module 4 is 3300 system is new to me. 🙂
Thank you
Taylor T
Location: Texas
Module 4 is the board with components that hold the IR receiver.
The board that is broken in your Beomaster.
See the 4 in the circle on your board ?
Photos:
Martin
Module 4 is the board with components that hold the IR receiver.
The board that is broken in your Beomaster.
See the 4 in the circle on your board ?
Photos:
Martin
Wow i need more sleep even looking at the service manual i missed that. How much would you be looking for it if your looking to sell ?
Taylor T.
Location: Texas
You have email.
Martin
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member