Beolink5000 - Beovision7000 - motorised stand= not working together...

21 replies
Z(
Offline
Zugn (archived)
Bronze
Posted November 12, 2008 at 19:21 GMT
#1858886

Hello!

 

I have this combination with the Beovision 7000 and the Beolink 5000, and when i connect the 4 pin plug from the motorised stand to the Beovision 7000, then it not works.

Manual says, i must press the picture key at once, then it must work with the < and >. But it doesn't.:( Immediatelly after pressing the picture key, the "brilliance" is in the corner. This word should be there only if i press the picture key twice!

 

Is there something what i must set in the Beovision, before connect such a device?

 Many thanks in advance for any help!

 

Charles

M(
Offline
Medogsfat (archived)
Bronze
Posted November 13, 2008 at 02:36 GMT
#1858887

You need to connect the stand to the TV before you connect the TV to the mains power supply & power up or the stand won't be recognised.

Unplug everything & start again plugging the stand cable into the TV first.

Chris.

Z(
Offline
Zugn (archived)
Bronze
Posted November 18, 2008 at 03:42 GMT
#1858888

Thank you Chris!

 

I have try it, but no success.:(

After i unplug everything, i have wait about 30 seconds to ensure, that all the capacitors in the circuits are empty.

Maybe i give a try to wait more after disconnect from the main supply.

 

Thanks: Charles

TO
Offline
tournedos
Bronze
Posted November 18, 2008 at 04:20 GMT
#1858889
PH
Offline
PhilLondon
Bronze
Posted November 18, 2008 at 04:32 GMT
#1858890
Beovision 7 or 7000 or MX7000?
Z(
Offline
Zugn (archived)
Bronze
Posted November 18, 2008 at 18:20 GMT
#1858891

Beovision MX7000!

Sorry, i wasn't perfect by the beginning!

I try out with longer power off period (totally disconnected from main supply), but still no function.

I don't have here the Beolink 1000.

Only Beolink 5000 and Beolink 7000 is at home, but I will charge now the 7000, maybe that works!

 

Thanks for the help!!!

Charles

PH
Offline
PhilLondon
Bronze
Posted November 19, 2008 at 06:08 GMT
#1858892
It appears the problem is with the stand or the TV, not with the remote, unfortunately.
Z(
Offline
Zugn (archived)
Bronze
Posted November 19, 2008 at 10:46 GMT
#1858893

Oh Dear...

Can someone help me out with the 4 pin plug connection diagram?

I have a multimeter here, can measure the voltage what is coming out from the TV.

Maybe i can put a separate power supply to let work alone the stand too...

 

The only problem what i see now is, that (when i believe the remote control manual) when i press only once the picture key, then i shouldn't see the "brilliance" word on the screen. This must be happen only, if the picture button is pressed twice!

Or i misunderstand something?

 

Thanks:Charles

Z(
Offline
Zugn (archived)
Bronze
Posted November 19, 2008 at 10:55 GMT
#1858894

btw., the Beolink 7000 don't wish to give "free" the picture button on the panel, that means, that it don't light.

grrrrr...

TO
Offline
tournedos
Bronze
Posted November 19, 2008 at 10:58 GMT
#1858895
I still stand (pardon the pun...) with my original idea that your set has the later version software just like my MX6000 does, and the stand simply cannot be operated using the "picture" key. In that case, the remote command "picture" is simply for adjusting the picture, and that's why it goes to brilliance at once. You have to go through the setup menu ("stand" is there, is it?) or use a remote with the "stand" command.
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold