Hello,

I solved a big part of my issue by adding a Beolink Converter 1611 on the ML side. Now I can listen to music from my Beovision 11 on the Beolink passive. But I still have a issue.

Is it possible to listen to a audio source from the Beovision 11 (for example DVD) on the Beolink passive and in the same time watching in different source (V.mem) on the Beovision 11 ?

I am not able for the moment to reach that goal. What are the settings I have to set on the BLC NL/ML and what is the option I need to set on the Beolink passive?

 

Thanks for your help.

I don't know that you'll be able to do that.

Thanks for your answer.

I was able to do it with my old Beovision 7 but I was only in ML. Perhaps you are right, it is not possible to do it with the BLC NL/ML.

I am very bad surprised about your experience with the NL/ML converter. I always thought that with this converter a new BS4-based BV (Avant, BV 11) would work like a BS3-based BV in a Masterlink environment.

I use a BV 7 as videomaster in my masterlink setup. If a source is used at BV 7 it is a key feature for me to get access to another source of BV 7 (inbuilt or directly connected) from my linkrooms with masterlinked BVs or Beolink passive/active. I use this feature every day. If this doesn't work with the converter anymore it would be worthless for me and I wouldn't have a chance to replace my BV 7 by an Avant/BV 11 in the future.

Can anybody confirm that this feature is not possible anymore with the NL/ML converter?

Regards

Räuber

I guess I need a better xplanation of exactly what you're trying to do.

I.E do you want av1 on video on thebv11

And sounds from av2 on another system?

I don't think BV11 can play two of its own sources simultaneously i.e one in linkroom and one in main room.

Hope someone can confirm.

I agree

It cannot ... At least that I've figured out.

Was that possible with the bsys3?

Hiort wrote:

I don't think BV11 can play two of its own sources simultaneously i.e one in linkroom and one in main room.

Hope someone can confirm.

Happy owner of: BV11 46", NL/ML Converter, 2 x Beocom 2, Beocom 6000, Beosound Moment, Beolab 3, Beolab 2000, BeoremoteOne, Beolab 11, Beolab 3500, 2 x Beolit 12

mjmedlo wrote:

I agree

It cannot ... At least that I've figured out.

Was that possible with the bsys3?

Yes, of course!

Only one great feature of masterlink.

And it works not only with Beosys3-based TVs. It also worked with my good old Avant from the year 1998!

Regards

Räuber

So you're playing the hdmi source in one room and then playing the audio from hdmi 3 in another?

Previously .. With the sys3?