Thank you to our Sponsors
Hi experts,
I would like to use a Beolink Converter 1611 for the connection of a Beogram 4500 turntable to the Masterlink System.
My question is how to make a "reset" with the Converter 1611, because I don`t know the kind of configuration, which the last owner of the converter 1611 has used.
Thanks , julefreund
Hi, thanks for the info.
If the 1611 configurates by itself and don`t need any special reset, why I cannot start the Beogram 4500 with the BEO4 ? I have connected the Converter with Datalink to the Beogram and with Masterlink cable to the Masterlink system. BV7-40 on V-Opt. 2, BS 3200 with A-Opt. 0 .
Any idea ?
julefreund
How many pins in the cable connector from the BG4500? There should be 7 (2 extra screw in pins) for datalink. Sometimes these have been removed or lost.
There are 7 pins in the datalink cable. I used it before with my BS Ouverture and it works perfekt. I had fully control of the Beogram with the BEO4. Now after replacement of the BS Ouverture by a BS 3200 I would like to use the Converter 1611 for remote control, but it doesn`t work. Why ??
julefreund
That is, what I already expected. Thanks a lot to have that now finally clarified. So I will connect the Datalink cable directly to the BS 3200 (AUX) and start the Beogram 4500 manually. The Beolink Converter 1611 is not needed for this configuration.
Regards, julefreund
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member