Beolink App > MLGW > AppleTV (PUC)

9 replies
T(
Offline
tmd19 (archived2)
Bronze
Posted June 23, 2013 at 12:45 GMT
#1997332

Hi,

i have a beovision10/40 with connected AppleTV. Beo 4 > AppleTV control with puc work perfect.

Now i try to control the AppleTV with the BeolInk App via mlgw. (TV,Radio,DTV etc works)

Up, Down,GO etc dont work. only the "Exit" button working/receiving on the Apple TV.

Sources Setup for Apple TV on MLGW is: Source:V.MEM / Dst:TV / UI Type:Generic

Any idea ?

Thanks :) 

 

B(
Offline
BeoMegaMan (archived2)
Bronze
Posted June 23, 2013 at 16:34 GMT
#1997333
Change the UI to Generic + Arrows + Colours and see if that helps.
T(
Offline
tmd19 (archived2)
Bronze
Posted June 23, 2013 at 17:05 GMT
#1997334

i change the UI to Generic + Arrows + Colours, Unfortunately no difference, only the EXIT key is detected.

B(
Offline
BeoMegaMan (archived2)
Bronze
Posted June 23, 2013 at 17:42 GMT
#1997335
If the the TV is the only thing connected to the gateway I would just reset to default and quickly rebuild the project. I had a similar problem with a BV12-65 when using an Atlona matrix. The gateway would only trigger curtains matrix inputs. Redoing the configuration was the only remedy. Before going completely down that route try unplugging both the tv and gateway for a few minutes from power and give it one last go.
stefan
Offline
stefan
BronzeFounder
Posted June 23, 2013 at 17:43 GMT
#1997336

Did you save the new configuration, which will activate it ?

And maybe you should change Dst from TV to VTR. Not sure if this helps but maybe worth a try...

Stefan

T(
Offline
tmd19 (archived2)
Bronze
Posted June 23, 2013 at 18:48 GMT
#1997337

thanks, but I already tried.

I have found a solution for me:-) , I change the PUC settings from "Apple Remote" to "Apple Universol dock".

Now it works both -Beolink App + Beo 4

 

anyway thanks for your tips :-)

B(
Offline
BeoMegaMan (archived2)
Bronze
Posted June 23, 2013 at 20:15 GMT
#1997338
Sounds like you may be using older software then on the BV10. You should be able to use the gateway with apple remote with out any problems. Either way, if your satisfied that's all that matters!
T(
Offline
tmd19 (archived2)
Bronze
Posted June 23, 2013 at 20:48 GMT
#1997339

yes is true. software Build 153.

B(
Offline
BeoMegaMan (archived2)
Bronze
Posted June 23, 2013 at 21:41 GMT
#1997340
Ah, then it would seem as its just a simple incapability of puc codes.
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold