You got a bit of work there buddy 

I had my Blink 7000 recently serviced due to two-way com was broken. Five capacitors was changed on the top end of the remote. I found a picture, with the capacitors high-lighted here on this website, try a search, and you'll find it for sure.

Best of luck!  

It warms my heart knowing that there's many of us trying to keep these Monoliths alive. 

Thanks!;)

I think, the Beolink 7000 is still the best remote controll on this planet, so this one must work, for sure!:)

I read somewhere about two capacitors, but see also a lot more, so this sounds me more logical to change all these!

Thanks!:)

New problem:

I charged fully the remote, but it works only 1 seconds, then it give up.:(

If the remote is working, it try to lift up the display, but this works also 1 s long, so just a few mm's, and then dead.

It don't happen before, the BL7000 was chargeable on a regular basis.

One full charge was enough for a normal time period of operation, so don't think so, that the batteries are k.o.

It is a common fault, or something special?

Thanks: Charles

Maybe the charging doesn't work in the remote?

I decided to charge it again, maybe...

Again 1 full night on the charger, the red dot lights again during the charging, and today, everything working like before!😂

Ok., this mistake is solved now.:)

But all the other problems still here.

Anyone has some ideas, how to solve these?

Thanks: Charles