Beolab 4500's Display isues

4 replies
B(
Offline
Behave02 (archived)
Bronze
Posted May 23, 2007 at 11:37 GMT
#1804237

I have a pair of BL:4500's  connected up to my BS3000 . The issue that i have is that at present and for as long as i have had them, i can't seem to be able to see the led display info that is at the bottom right hand corner .Is this a conectivity issue or am i missing something here?

Thanks

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted May 23, 2007 at 12:11 GMT
#1804238

I assume you have the Beolab 4500's connected using the powerlink sockets and the switch is either in L or R

I am assuming the switch is not in the "A" position ?

In standby there should be a small red led next to the display

Location: Hampshire, England

JO
Offline
joeyboygolf
BronzeFounder
Posted May 23, 2007 at 12:28 GMT
#1804239
And the switch on the side of the speaker needs to be in the Audio position. You need to use fully wired Mk2 powerlink cables.
Z(
Offline
ZeTof (archived)
Bronze
Posted May 23, 2007 at 14:36 GMT
#1804240

... and you have to reset BS3000 and Blab4500 to be sure it works. (unplug power cable of both unit until stby led disapear, and re-plug them).

 

 

 

 

(sorry for my english...)

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold