Beolab 3 problems

4 replies
O(
Offline
omid (archived2)
Bronze
Posted October 31, 2021 at 19:05 GMT
#2160183

Hello Beoworld,

 

I have a Beolab 3 which is not functioning as per my other ones. It turns on and off the same as the other ones, but only sound from the tweeter. Then if I turn the volume up at a certain point the speaker kicks in and starts to play like the other ones, and you can feel the vibration on the speakers. 

If I turn the volume down there is a static sound on it...until it goes back to the way it was meaning only sound from tweeter, until i turn the volume up for it to kick in....

Any ideas?

Thank you,

E(
Offline
Esax (archived2)
Bronze
Posted October 31, 2021 at 19:35 GMT
#2160184
Do you have a powerlink splitter?
O(
Offline
omid (archived2)
Bronze
Posted October 31, 2021 at 20:16 GMT
#2160185

I've tried different connections and the behavior is the same, so at the moment its set to line in and is connected via 3.5mm to an audio out.

But before I had single power link connected to a beosound 4 and directly to the beolab 3 and the behavior was the same...

BE
Offline
beouser19
Gold
Posted October 31, 2021 at 20:44 GMT
#2160186

Hi,

i think you have to get it repaired, probebly icepower module faulty

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold