Beolab 2 Beolab 3 Beocom 1 Rubber Materials

11 replies
R(
Offline
rviola (archived2)
Bronze
Posted February 11, 2022 at 23:17 GMT
#2163769

English

. Beolab 2 Beocom 1 rubber materials:

Hello, I notice that the materials of the Beolab 2 (front and sides) and the Beocom 1 (base) are getting sticky over time, can someone guide me how to avoid this or how they can be maintained or cleaned.

2. BeoLab 2 could be somehow connected to equipment other than Bang Olufsen.

Thank you. Greetings

 

---------------------------------------------------------------------------------------------------------------------------------------------

Spanish/Español

1. Materiales de goma Beolab 2 Beocom 1:

Hola, observo que los materiles del Beolab 2 (lado frontal y los costados) como el Beocom 1 (base) se estan poniendo pegajosos con el paso del tiempo, puede alguien orientarme como evitar esto o como se pueden mantener o limpiar.  

2. BeoLab 2 se podria conectar de alguna forma algun equipo que no sea Bang Olufsen. 

Gracias. Saludos

9_LEE
Offline
9_LEE
Bronze
Posted February 12, 2022 at 11:10 GMT
#2163770

I have a little bit of experience with these, and in all my time I've never been able to 'restore' them to an acceptable level once they go sticky..  🙁

R(
Offline
rviola (archived2)
Bronze
Posted February 14, 2022 at 14:26 GMT
#2163771

Thanks, perhaps with some transparent silicone for car rubbers. 

R(
Offline
rviola (archived2)
Bronze
Posted February 14, 2022 at 14:26 GMT
#2163772

Thanks, perhaps with some transparent silicone for car rubbers. 

R(
Offline
rviola (archived2)
Bronze
Posted February 14, 2022 at 14:26 GMT
#2163773

Thanks, perhaps with some transparent silicone for car rubbers. 

R(
Offline
rviola (archived2)
Bronze
Posted February 14, 2022 at 14:27 GMT
#2163774

Thanks, perhaps with some transparent silicone for car´s rubber- 

IP
Offline
Ipe
Bronze
Posted February 16, 2022 at 11:45 GMT
#2163775

Hi,

I have samo problem with my Beovision. Frame is getting sticky. I suppose that there are no solution to that. It's not possible to use any detergent to remove it and stronger ones will melt the stuff.

I think only solution is to remove the coating somehow. That of course mean that you have to dismantle parts first. After that it's possible to paint those parts with desired colour .

It would be interesting to know if there is some better and easier way:)

Location: Finland

IP
Offline
Ipe
Bronze
Posted February 16, 2022 at 11:49 GMT
#2163776

Actually there is same problem with boat fenders.

With wax and alcohol it's possible to remove that but it comes back quite soon.

 

Location: Finland

R(
Offline
rviola (archived2)
Bronze
Posted February 17, 2022 at 16:41 GMT
#2163777

Interested. I set on the rubber a Car Liquid transparent orange color(but I Don't remember the Brand) and helps

R(
Offline
rviola (archived2)
Bronze
Posted February 17, 2022 at 16:41 GMT
#2163778

Interested. I set on the rubber a Car Liquid transparent orange color(but I Don't remember the Brand) and helps

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold