Thank you to our Sponsors
Hi
I think it would be great with one post where we can share our "BeoHacks"...
- Upgrading panels in old Beovision TV's
I would love to see all your creative solutions...
I will be trying Ravsted's solution of upgrading the screen on a Beovision 5. I have a break in October so will be doing it then. I will report back with photos. We have bought a 43 inch TV as it is almost impossible to find 42 inch as he used.
Stoobie
Wooden slats (DIY) on classic BeoLab's ...
My latest BeoHack 😁
Full story: /forum/general-discussion-and-questions/diy-oak-lamellaslats-for-classic-beolabs
Hi everybody,
as I have problems with hard wiring every device I have to make some devices wireless.
Today I started to make my BeoLink NL/ML Converter wireless. I can wire all ML devices together in one place (behind my Beovision 7) and the rest is now completely wireless.
Adding wireless NL to the Blink Converter is pretty easy as I used a module from Vonets.
Hi Tim84,Thanks for sharing that - good to know! I see that the Vonets VM300-L is 2.4 GHz only (like the Playmaker, Beolit 12, etc). This would be great if you have a 5GHz device only (like Beosound 5 Encore) and you want to avoid interfering with your WISA network. By any chance did you evaluate the Vonets VM5G which appears to be the same, but also works on the 5GHz band?LawrenceHi everybody, as I have problems with hard wiring every device I have to make some devices wireless. Today I started to make my BeoLink NL/ML Converter wireless. I can wire all ML devices together in one place (behind my Beovision 7) and the rest is now completely wireless. Adding wireless NL to the Blink Converter is pretty easy as I used a module from Vonets. Vonets VM300-L Wireless Modul Wifi Bridge Ethernet Wifi Repeater Mini Router Portable Wifi Hotspot Signal Access Point RJ45 LAN Adapter für DIY Professionelle Netzwerkgeräte: Amazon.de: Computer & Zubehör The module is completely wired internally to the BeoLink Converter and there is nothing visible from the outside. It looks like the Converter was planed to be used like that. Next Up is my Masterlink Gateway and the Beovision 7 with wireless network for blu-ray. Living room: BeoVision 7 MKV + BeoLab 7-2 + 2x BeoLab 8000 + BeoLab 2 + 2x BeoLab 4000 Office / guest room: BV 7-32 MKIV / BL7-1; BeoSound Core + Turntable Kitchen: BeoPlay M3 Bathroom: Gira Radio + BeoLab Celestial Entrance: BeoPlay M3
Here is a proposed Beosound Century mod that I would like to do, created on an art software app. I integrated a touchscreen Samsung mobile phone into the design... Login to view image
Below is a modification that I did to a Beosound 3000 and stand. With Bluetooth receiver permanently attached onto the back of the unit. Also attached a floating Samsung tablet to the front of the simulated wood effect stand...
***
Photo removed due to illegal use of Bang & Olufsen A/S registered trademark logo.
Using B&Os logo on homemade or home-finished items is a trademark violation.
Dillen
Beoworld moderator
***
***
Photo removed due to illegal use of Bang & Olufsen A/S registered trademark logo.
Using B&Os logo on homemade or home-finished items is a trademark violation.
Dillen
Beoworld moderator
***
Here are my Beovox CX50 mods. Aluminium back plates with speaker binding posts, better internal components...***
***
Photo removed due to illegal use of Bang & Olufsen A/S registered trademark logo.
Using B&Os logo on homemade or home-finished items is a trademark violation.
Dillen
Beoworld moderator
***
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member