Capacitor 2103 is to the left of the laser output potentiometer and just above the 6101 chip. They are coloured black on the drawing.
Thank you to our Sponsors
Beocenter 9500
17 replies
Got it !!! Graham...do you think we could just change that out to the spec that you noted above without testing?? And give 'er a shot??
Gracias..
Well the experts do say that you should set the laser current and offset up again. If you promise not to tell anybody I'll let you into a secret................
Hi Graham and others..
We replaced the C2103 with exact replacement.. still not working..
I see in the diagram that there is a TR 6108 (BC 338-16) in the same circut and a R 3116...but in the parts sheet , it does not list a R 3116 for specs..
Any other ideas??
Outside my level of expertise I'm afraid. Maybe Martin (Dillen) can help.
Actually are the values for all resistors between 3108 to 3038 not given as 1 ohm 2% 1/3W ?
My B&O Icons:
ahhhh thanks Peter...just saw that...3108 to 3138....are just as you say..
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member