B&OCENTER 5000

6 replies

Hi All,

A second post on the same subject. 

I have recently aquired above mentioned unit. I still need a couple of parts, 1. Hinge for the metal cover on the "spring loaded side" as its worn and the cover slips off. 2. Replacement plastic record deck cover as the original has snapped all its plastic hinges off at the spring.

 

 Any advice or information on the parts etc would be much appreciated, especialy if you have them and I can purchase them!!

 

Many thanks,

Boots 

I am afraid parts are not obtainable unless you find a donor - and needless to say they tend all to have similar faults!

This is a superb music center - a basic version of the 7000 but the sound quality was just as good. The black finish is anodising - very tough!

You may need a new cartridge as the record section is normally excellent. 

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beovision-11.png Beovision-11.png
Beotime.png Beotime.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-5.png Beosound-5.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoplay-Portal.png Beoplay-Portal.png
Beoplay-Earset.png Beoplay-Earset.png
Beomaster.png Beomaster.png
Beolit.png Beolit.png
Beogram-400x.png Beogram-400x.png
Beocenter-2.png Beocenter-2.png

Boots,

Welcome to Beoworld !

The Beocenter 5000 is actually one of the rarer machines, lovely and superb build and quality.

I can't help you with the turntable dustcover but I have a few brand new original hinge pieces in stock, they always break where they grip into the aluminum lid if forced to close to fast. I can also supply belts for the turntable and tapedeck sections but I suppose they are still fine in your machine. PM me for details. A dustcover from a Beocenter 7000 or 7002 will also fit but some has the model name printed on the rearmost metal part, not that it matter much regarding functionality.

A capacitor kit is also available but probably not seriously needed if everything works as-is. 🤒

Martin

Where are you located?

I am in Birkenhead and have a defunct Beocenter 5000 which you would be welcome to collect.

The amplifier works but the tape and phono sections do not. It is almost complete apart from the turntable belt and cartridge.

Simon

Hi Peter,

Thanks for the info, I have contacted Dillen & Simon about parts etc.

 

All the best

Boots 

I have a turntable cover for a Beo 5, intact, I'll exchange with a Beo 7002 tt cover if you have. :)

ciao ciao 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.