1. Eclipse (with Beolabs/speakers connected)

1. Beosound Core (with speakers connected) is one or both BLC set as primary en secundairy products set? Or not at all?

1. Beolink NL/ML converter (BLC) and ML connected to a T1611 converter PL/DL connected to a Beomaster 7000; speakers connected to the BM7000 or Core?)

1. BLC with Ouverture ML connected; speakers connected to the BLC or Ouverture?

1. Beovision Eclipse with speakers
2. BLC  - ML connected to T1611 - PL/DL connected to BM7000 BLC set as VMaster - IR option 2 - Friendly in NL to "BS7000 BLC" (just to identify) Check the boxes of the CD, A.Mem, N.Radio in "Experience mapped to NL" - you can rename f.e. CD to cd7000 and N.Radio to ph7000 (if existing in your setup).
3. BLC with PL speakers connected (instead of the Ouverture) - ML connected - BS Ouverture BLC set as ASlave - IR option 2 - Friendly in NL to "Ouverture BLC" Connect the/a IR eye Check the boxes of the CD, A.Mem in "Experience mapped to NL" - you can rename f.e. CD to cd3000 and A.Mem to tape3000 (if existing in your setup).
4. I presume you have a Beosound Core (black) ant NOT  the Beoconnect Core (white). open the B&o app - select the Beosound Core - select Settings; Configure; Settings; Beolink; Link to other products; "connect to primay" set to the BS7000 BLC; the secundary to the BS3000 BLC (dont forget the Connect button with both) go 3 pages back - select Your Content; sources; in local list; check the boxes of all sources to be visible on the Beosound Core; Save
5. Now the sources are integrated as sources of the Beosound Core and can be started on the Beosound Core. Then they can be expanded to the BV Eclipse and the BS3000 BLC.

• To expand to the BS3000 BLC, I'm not sure but I expect you need an additional IR-eye connected to this BLC, to join the sources of the Eclipse and the Beosound Core (try without first though).
• The use of a IR remote can be tricky (Beo4 / BR1 in IR mode). You have two CD players as sources, but the IR gives the CD command but is not clear which CD it should start.  So if you want to use a BR1 to controll everything be aware that you only can have 1 programmed as CD, 1 as ATape (=AMem), 1 as Phono (=N.Radio), 1 as ATape2 (=N.Music) and 1 as A.Aux.
• when you solemnly use the app or a Halo or you have the BR1 bluetooth connected to the Beosound Core it should be fine. You will get all the Beosound Core sources available (also the onces set from the BLC's).

link

I don't have any IR-eyes connected to the BLCs. I tried ASLAVE and got this and this for the IR mapping. Nothing linked at all. I modified the TX mapping to what it should be from the other BLC and still nothing worked. So I reverted to VMASTER and all the NL sources could bplayed. If I play a source  from the Core and then via the App change what the core is playing to a BM7000 source that then plays on the Overture, with the only drawback that it is then audible on the speaker attached to the Core. So I can achieve what I need via this workaround. Thanks for you help. Paul

• you have setup the Main BLC as proposed (please confirm)
• you have setup the Beosound Core as proposed (please confirm)
• you have setup the Ouverture BLC as proposed and discussed above.
• start a ML source of the BM7000 on the BS Core (BR1 BT or B&o app)
• expand the BS Core to the Ouverture BLC or JOIN the Ouverture BLC