Ridiculous.
I wonder what the price was new.
It's used now so will need deactivating and getting used to the new surroundings and owner.

If I use it for the light in my fishtank, will the fish look more real ?

Martin

Dillen wrote:

It's used now so will need deactivating and getting used to the new surroundings and owner.

I do hope that was sarcasm..  😂

doubt that, but I am sure the fish will be happy with the new acoustic properties of the lamp system 😂

9 LEE wrote:

Dillen wrote:

It's used now so will need deactivating and getting used to the new surroundings and owner.

I do hope that was sarcasm..  😂

Why ? Did you actually consider buying it ?  😂

The new owner will obviously have to ship it back to the producer before showing it its new setup. They will then
inspect it, demagnetize the copper and vaccuum out any debris and other remains left inside by
the previous owners mains. This is particularly important if the cable has been used with coal produced electricity and/or
in areas with high winds and a long distance to the nearest transformer station.
In most cases, they will also polish out any surface marks on the side of the insulation
that faces the copper to give the electrons a cleaner and smoother ride.
The screws will also be tightened and if any of the gold plating on the threading is found to be below a certain
minimum thickness, the affected screw(s) will be replaced.
With all new screws and a proper burn-in time, you won't believe your ears.

I recently heard of a situation where a new owner couldn't make one of these cables sound right.
He returned it and upon close inspection it was found out that one of the factory workers
had accidentally used DC solder instead of AC.
Bummer.

One thing I don't understand though, is how they can make the same cable work equally good in 50 and 60 Hz areas ?

Martin

Dillen wrote:

Ridiculous.
I wonder what the price was new.

I managed to dig up some marketing blurb and a list price of £1,195 for the 1.5 meter cable. The part on experimenting with revised internal wiring configurations is quite funny:

“The Chord Sarum Power Cable uses gold plated Furutech connectors. The engineers were able to experiment extensively with different types of connectors and wiring configurations, in the listening tests Chord decided that the build quality of the Furatech was consistently better and was extremely impressed with the overall build quality.

The engineers were able to experiment with revised internal wiring configurations on the plug itself, which is not possible within a conventional mains plug.

Available in 3 standard lengths of 1 metre, 1.5 metre and 2 metre with the option to add additional metres upon request.

Every Sarum cable is hand made and uses silver plated multi strand oxygen free copper in order to provide the very best in signal without any loss or interference.

But is not just about the cable itself, each strand of the Sarum cable has been precision polished to ensure a microscopically smooth surface before being plated with a heavy layer of silver.

With Teflon insulation, its widely acknowledged as being the best dielectric material to use in order to offer the very finest insulation from surrounding cables or shields.”

Dillen wrote:

One thing I don't understand though, is how they can make the same cable work equally good in 50 and 60 Hz areas ?

These cables are made for 50 Hz only, in 60Hz areas they will only work at riptide and full moon.

The 60Hz version is a black cable with white jacks, as it handles 20% more HZ it cost nearly the double because of thicker gold plating and reverse spun copper leads.

Søren Mexico wrote:

Dillen wrote:

One thing I don't understand though, is how they can make the same cable work equally good in 50 and 60 Hz areas ?

These cables are made for 50 Hz only, in 60Hz areas they will only work at riptide and full moon.

The 60Hz version is a black cable with white jacks, as it handles 20% more HZ it cost nearly the double because of thicker gold plating and reverse spun copper leads.

I found someone who was actually impressed by all that...  !!

😂
Curl up the excess length of that cable and you can see its nice properties fly out the window.
It will only work properly if kept strictly straight.

Well at least they've got the last meter or two covered fairly alright but I wonder if they ever thought
about the inwall wiring, the quality of the outlets, switches, fuseboxes, meters and the rest of the 20 Km cable length
from the power-station with all its connections, splicings and transformers, let alone what goes on
inside the amplifier or whatever it feeds.

Oxygen-free copper. Bah.
Truth is that copper is actually a fairly bad conductor unless used supercold.
Any cheap multimeter will easily tell its resistance, oxygen-free or not.

I'm impressed too. Mainly that some people actually buy those cables.
I think, I will start producing something similar. My biggest problem would be to stop laughing.  😂

Martin

I have always liked the posts you can use around the floor to support the power and signal cables; apparently they don't like to touch anything or the sound suffers. These are very affordable: