Thanks, reconfigured the Beo4 remote like you. instructed. But still doesn't work. Just to confirm, the IR receiver in the BM7000 is internal? I don't need an external IR receiver for it? I dismantled so many things yesterday when removing the Beovision 7-32 out of the equation that I want to be sure about this.
Thank you to our Sponsors
Beomaster 7000 not responding to Beo4 remote
17 replies
Looking at this thread /forum/general-discussion-and-questions/beomaster-7000-infra-red-not-working, might there also not be an option to turn off the IR receiver at the BM7000 and I might have accidentally done that when resetting the Beo4? Because, before that, the remote was sort of working. And if that is another solution, question remains how to turn on the IR receiver on the BM7000.
Just to confirm, the IR receiver in the BM7000 is internal?Yes it is. There was an external sensor available in case you wanted to put the main unit in a cupboard, but even fitting this wouldn;t disable the internal sensor.
Location: Warwickshire, UK
My B&O Icons:
With "It was sort of working before" I meant after removing Beovision 7-32 and Masterlink from the system. It did work yesterday briefly when the system was finally a pure audio setup: Beomaster with a connected Beo CD, Beo tape deck and Beo record player (the complete set) and two Beolab 4 speakers attached to it. All is working fine when using buttons on the devices. It might have stopped working because I did a RESET? on the Beo4 (I wanted to clear out all config for the now gone TV), or just by coincidence . I just want to rule out all options before I decide to bring in the Beomaster 7000 for repair of a faulty IR receiver.
Location: Warwickshire, UK
My B&O Icons:
That did the trick! Could not type in 2002 on CONFIG? on the new Beo4 remote for whatever reason, but could with the old one. Then successfully could sent with that same old remote A.OPTION > 1 to Beomaster 7000 (saw it being received) and then everything worked again; also with the new Beo4 remote.
Thanks you so much!
Thanks you so much!
Location: Warwickshire, UK
My B&O Icons:
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member