Hi guys.

I have an old PowerPC mac (G4) and I wanted to use it with Beolink PC2. I've installed BM-Link, connected BeoLink PC2 to mac (USB and Audio IN), masterlink to BeoLab 2000.

At first BM-Link said, taht the software version is 1.21. There was no sound on BeoLab 2000, I tried different sources (N.Music, A.Tape2 etc) - no luck, but I was able to hear the music via headphones connected to headphone socket on the BeoLink PC2. BM-Link saw the converter, all sliders worked (Bass, Treble, Volume). I figured I have to upgrade the firmware, so I did it using firmware 1.31 supplied with BM-Link - still no sound on BeoLab2000, but this time also no sound on headphones :( I've connected BeoLab 4500 speakers via PowerLink and I've heard the music from iTunes. Mac/BM-Link still sees BeoLink PC2, shows 1.31. firmware version, volume/bass/treble works, but I can only hear music via PowerLink, nothing on BeoLab 2000 connected via Masterlink. I've tried to connect Beolink PC2 to my Beosound 2500 via BeoLink 1611 (the newer one) connected to AUX port (it works with BeoLab 2000 and BeoLab 3500, so converter is OK and can act as a master), but also no music via BeoSound (pressing N.Music on Beo4 remote sets A.Tape2 source on my BeoSound 2500 - is A.Tape2 the same as N.Music??).

What am I doing wrong? Where can I get LinkPlayer 1/2 for PowerPC mac to try with it?

Thanks in advance for any help.

Best regards,
adam

P.S. I've already read a therad about BeoLink PC2 on this forum (https://forum.beoworld.org/forums/topic/playing-with-blink-pc2-and-beoport/), but didn't found anything that can solve my problem...