I guess theBeolink PC2 is setup as a link room since you dont have ML conflicts with that?

Other than that, N.Radio from the NL/ML converter conflicts with the source PHONO (which is the same as N.RADIO) on the Ouverture.

My best advice would be to make the line in from the NL/ML converter a Video source to avoid conflicts

Thank you for the answer. Well, BeoLink PC2 isn't fully operational because I'm using it with PowerMac G4 and I have some problems with it (after firmware upgrade from 1.20 to 1.30 I have no sound on phones output). PC2 is able to communicate with directly connected speakers and amplifier, turns it on and off with iTunes starting/closing, but no sound on masterlink and phones output - TBD). So:

1. you suggest to make the converter Video Master and map LINE-IN to one of the Video sources?
2. you said that N.MUSIC conflicts with PHONO source of Ouverture - what is transmitted from Ouverture as PHONO? I have a TV connected to AUX and it's seen as A. AUX on the ML, CD is CD, TAPE i A. TAPE, RADIO is RADIO. so what is PHONO??? I was going to connect my Beogram 3000 also to AUX of Ouverture (with Y DIN-7 connector, port will be shared with TV). Can it be the reason of no sound from PC2 on the bus?


Best regards
Adam

Update - NL/ML converter works as Video Master (I dont't know why it wasn't working previously configured as V Master), LINE-IN is mapped as PC (standard key on my Beo4 remote) and TV (additional physical button on BL2000) and it streams music from bluetooth receiver. This time PC2 was not connected to the bus, so maybe that's the reason...
Is there any way to stream to Ouverture? I tried to turn on TV/PC source on ouverture, but it's not switching to such sources...

Great to hear that you got it working to some extent by changing the NL/ML converter ti V.MASTER.

link

Is there any way to stream to Ouverture? I tried to turn on TV/PC source on ouverture, but it’s not switching to such sources…

link

LINE-IN is mapped as PC

I am not sure that the Ouverture will react to the PC command. My Ouverture does not at least. Try to map it to video source like V.MEM or DVD

link

you said that N.MUSIC conflicts with PHONO source of Ouverture – what is transmitted from Ouverture as PHONO? I have a TV connected to AUX and it’s seen as A. AUX on the ML, CD is CD, TAPE i A. TAPE, RADIO is RADIO. so what is PHONO???

The Ouverture has the possibility to control a second tape player and a record player connected to the AUX connector if they have datalink. For that reason the commands PHONO (record player) and Tape2 is both redirected to the AUX connector on the Ouverture and it will show the right name in the display. However if something without datalink is connected to the  AUX connector AUX is shown in the display and therefor the Ouverture will also accept the AUX command. Because of this the sources PHONO (which is the same as N.RADIO) and Tape2 (which is the same as N.MUSIC) can not be used by any other sources in the ML network, and the Beolink PC2 can therefor not be used as a source in this setup. For the Beolink PC2 to work in this setup it can only function as a link room (option 6) or else you have to replace the Ouverture to a more moderns system that will work with the N.RADIO and N.MUSIC sources from an other device. This could for example be the BS3000 with the right software version.