Penta electricity disaster!

9 replies
pepps
Offline
pepps
GoldModerator
Posted January 4, 2024 at 04:56 GMT
#1643129
Dear Beoworlders,

I have a shameful confession to make. I recently wanted to extend the power cord on my Penta mk2 to help hide the cable. Instead of soldering a new length of flex from the Penta amp itself I used a junction box.

The junction box was new to me and of a style I wasn't used to. In my haste I connected live and neutral to the same binding post!

When I applied power the Penta amp remained lifeless (no LED and no display) and the ring main for all first floor sockets tripped on the house consumer unit.
I have since had no luck getting the Penta amp to work.

With your varying levels of expertise, can anyone imagine what might have happened inside the Penta and how I should go about tracing the problem(s)?

I've been running the pair of Pentas from an MCL2P but the power is way off and I really miss the displays.

If anyone has any ideas please let me know. And please, feel free to mock me for the stupidity of my blunder.

Julian

Location: Kent, UK

My B&O Icons:

Beovision-Avant.png Beovision-Avant.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-E4.png Beoplay-E4.png
Beomaster.png Beomaster.png
BeoCenter-9500.png BeoCenter-9500.png
Beofan for many years with a penchant for 1990s audio systems.
filip_kbh
Offline
filip_kbh
Bronze
Posted January 5, 2024 at 00:00 GMT
#1661468
First, check the fuse(s). There is one where the power chord comes in (you need to unmount the bottom of the amp. I don't remember if there is more than one fuse.

Location: Copenhagen

pepps
Offline
pepps
GoldModerator
Posted January 5, 2024 at 10:53 GMT
Edited January 5, 2024 at 10:55 GMT
#1661480

Location: Kent, UK

My B&O Icons:

Beovision-Avant.png Beovision-Avant.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-E4.png Beoplay-E4.png
Beomaster.png Beomaster.png
BeoCenter-9500.png BeoCenter-9500.png
Beofan for many years with a penchant for 1990s audio systems.
lesbart
Offline
lesbart
Silver
Posted January 5, 2024 at 14:47 GMT
Edited January 5, 2024 at 15:02 GMT
#1661489
Hi Julian,
Is this what your fuse board looks like?
There are 2 of them: one for the small transformer and the other for the larger one.

/Les

Location: Norway

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beosound.png Beosound.png
Beosound-9000.png Beosound-9000.png
Beoremote-One.png Beoremote-One.png
Beoplay-V1.png Beoplay-V1.png
pepps
Offline
pepps
GoldModerator
Posted January 5, 2024 at 16:33 GMT
#1661498

Location: Kent, UK

My B&O Icons:

Beovision-Avant.png Beovision-Avant.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-E4.png Beoplay-E4.png
Beomaster.png Beomaster.png
BeoCenter-9500.png BeoCenter-9500.png
Beofan for many years with a penchant for 1990s audio systems.
pilatomic
Offline
pilatomic
Bronze
Posted January 11, 2024 at 09:33 GMT
#1661689
Hi pepps,

If you shorted live and neutral, there should have been no voltage applied to your Penta, so no damages. Did you check the continuity of the Penta power cord ? Is it possible that the cable was damaged during your modification ?

Regards,

Location: France

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beoplay-H9i.png Beoplay-H9i.png
Beoplay-A1.png Beoplay-A1.png
Beomaster.png Beomaster.png
pepps
Offline
pepps
GoldModerator
Posted January 11, 2024 at 10:24 GMT
Edited January 11, 2024 at 10:24 GMT
#1661692

Location: Kent, UK

My B&O Icons:

Beovision-Avant.png Beovision-Avant.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-E4.png Beoplay-E4.png
Beomaster.png Beomaster.png
BeoCenter-9500.png BeoCenter-9500.png
Beofan for many years with a penchant for 1990s audio systems.
pepps
Offline
pepps
GoldModerator
Posted February 6, 2024 at 15:53 GMT
#1662260
Update: I found the 5A fuse in the mains plug to be blown. Continuity in the mains cable is good.
I replaced the 5A fuse and connected to the mains. Red light. All good.
I connected the + and - speaker leads from the amp to the binding posts and the powerlink connector. Put everything back together. Connected the mains once again and "POP!". The little 2A fuse blew inside the amp.
So I'm still trying to suss out what's wrong.
Is a 5A mains fuse ok for a Penta amp?

Location: Kent, UK

My B&O Icons:

Beovision-Avant.png Beovision-Avant.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-E4.png Beoplay-E4.png
Beomaster.png Beomaster.png
BeoCenter-9500.png BeoCenter-9500.png
Beofan for many years with a penchant for 1990s audio systems.
pepps
Offline
pepps
GoldModerator
Posted February 10, 2024 at 20:37 GMT
#1662360
Update and closure!

Dear all, thank you for your contributions and suggestions. Today I had some spare time (at last) so took both my Penta amps off the towers and set them out on the kitchen table. Took them both apart (only to the power supply stage) and compared the working one to the not working one.
I resoldered some rather bad looking connections and swapped out both fuses in the Penta (the 2A and 150A (140A was not available but read on here that 150A would be ok)) before resoldering in a new mains power lead.
Reassembled and tested.
Everything works perfectly!!

Location: Kent, UK

My B&O Icons:

Beovision-Avant.png Beovision-Avant.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-E4.png Beoplay-E4.png
Beomaster.png Beomaster.png
BeoCenter-9500.png BeoCenter-9500.png
Beofan for many years with a penchant for 1990s audio systems.
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold