Do you have the file for the lens?
Thank you to our Sponsors
DIY Beolab 8000 Wood frets (STLs included).
193 replies
......
Login to view image I designed an acoustic lense that will fit on top of the BL 8000, Attached is the stl file. Thank you for the clips for the BL 8000, it is very appreciated. I tried to upload the stl file, but it seems not to working??
Do you have the file for the lens?
For the poor Australians out there who haven't got a beautiful selection of European wood frets available here's what I did :-)
- goto Bunnings and buy 14 of these : https://www.bunnings.com.au/20-x-4mm-2-4m-square-edged-board-tasmanian-oak_p0081864
- Spend X hours cutting + sanding (I just made one side a bit rounded to soften it)
- Use the 5mm STL file (deeper for the 20mm wood, worked better at holding than the 4mm model) and a drop of this on each position https://www.bunnings.com.au/selleys-80g-liquid-nails-clear-construction-adhesive_p1232438
- Then you have to hold the 14 frets in place for a bit until glue dries enough
Egru123 uploaded the file for me. Please see the post from him
Has anybody found a good supply for the 4mm Stripwood pieces in the U.K. ?
Many thanks,
Many thanks,
What lengths of Stripwood are people using ?
I see the design sheet here say 100cm, but other people have suggested 105cm.
I’m not sure what looks best ?
I see the design sheet here say 100cm, but other people have suggested 105cm.
I’m not sure what looks best ?
Hi all, while checking the 3d file i have doubts on measurements, see picture below (X, Y, Z)
thank you
mohcine
thank you
mohcine
Please guys having "doubts"…
Read the thread carefully, there are of course scale errors; x10, x1000, x100, whatever…
Just think!
Plenty of people have sorted it out and successfully made them better than me.
This is an enthusiast forum, not an after sales hotline.
With all due respect.
Read the thread carefully, there are of course scale errors; x10, x1000, x100, whatever…
Just think!
Plenty of people have sorted it out and successfully made them better than me.
This is an enthusiast forum, not an after sales hotline.
With all due respect.
Location: Paris France
[…] goto Bunnings…Let me invite you poor Australian" to our European "Leroy Merlin" in exchange to you inviting me to Bunnings! Nice work and happy to have helped…
Location: Paris France
Thank you matador for sharing
......
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member