DIY Beolab 6000 Wood frets STL included

28 replies
Jan
Offline
Jan
Bronze
Posted March 16, 2024 at 18:33 GMT
#1663252
Something is still not good enough. The two bottem frets don't fit and I have cut something off whit a sharp knife to make it fit. This maybe something to do with the fact I have mark 1 Beolabs 6000. So you need for one speaker:
  • One on the top (STL is good)
  • One for the tweeter (STL is good)
  • Two for de bottem, witch I have to adjust. (Current STL using for the top is not yet good enough, but still can be used with a little adjustment)
I will try to adjust this in a new STL-file for the bottom.
BR
Offline
BramBoerema
Bronze
Posted March 18, 2024 at 07:33 GMT
#1663280
Hello,

What are the things that have to be changed at the stl file?

 
Jan
Offline
Jan
Bronze
Posted March 19, 2024 at 23:19 GMT
#1663333
Hello Bram,

Is it a idea to share your files for Beolab 6000 Mark 2 with us so that we can see what to adjust it for the bottom ones?

 
BR
Offline
BramBoerema
Bronze
Posted March 20, 2024 at 07:45 GMT
#1663339
Hello,

I only have the files for the beolab 6000 that are given in this forum. I dont have files made at my own.

 

 
BR
Offline
BramBoerema
Bronze
Posted March 20, 2024 at 07:47 GMT
#1663340
My message was a reply on the post of you.

 
SH
Offline
sharknm
Bronze
Posted March 28, 2024 at 10:32 GMT
#1663602
Thank you for this. Mine are mark 1 as well and I will wait for the bottom one. I have a question, is there any chance to match it with 8000 frets, where the 4mm gap is used?

 

Thank you
MA
Offline
marexy
Silver
Posted May 28, 2024 at 10:12 GMT
#1664719
Sorry, I do not see any STL file :(
C1
Offline
c1sk0k1d
Bronze
Posted June 11, 2024 at 18:21 GMT
#1664976
Dear cgh,

I cannot locate the stl/pdf file.

Is there any way you could upload them again or indicate where to find them ?

Thank you !
TR
Offline
TrebsT
Bronze
Posted June 15, 2024 at 19:16 GMT
#1665027
Anybody got the files ? :)

 
CO
Offline
cokeman
Gold
Posted July 12, 2024 at 21:33 GMT
#1665434
I found the STL files for the Beolab 6000 wood covers, but they are impossible to download from the site. Getting error messages all the time. Any idea what the problem is?
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold