BL50 slave drops out randomly

2 replies
Hi guys
When you google this topic you actually get a hit from one of the old archived forums, sadly it isn't reachable...
I have a set of BL50 connected to a BC Core via USB.
The two speakers are connected via DPL (CAT8, 5Meters)
It has been working fine for 4-5 months, but recently the slave speaker drops out randomly...
I can then power off, and the slave is working again...  While the slave is in this non-playing state, I am still able to change the narrow/wide mode and it reacts on the slave...

Now I have been working with my local B&o Reseller to figure out where problem is...
I have tried replacing the DPL cable with a new CAT8 cable...  the problem persists here..

We then tried removing the BC Core and connecting via Wireless PL to my Eclipse, and strangely enough we are unable to replicate the problem in this setup...
For various reasons the WPL setup will not fly in the long run, so I had to switch back to BC Connect...  and promptly I got the problem again now...

I was hoping that I wasn't the only one with this problem?
So any help would be great...

I am waiting for my B&o dealer to return to me with an action plan... and it will most likely involve replacing the slave...  and eventually the master if it doesn't solve the problem..

Not sure why, but B&o has been kinda a nightmare for me since I bought a set of BL28 some years back...  I had them setup in a wireless setup, and there were _many_ problems with them... so I ended up upgrading to BL50 and all cabled setup...  and here we are.. :-)
So the next step naturally must be the BL90?...  

/H 


   

Location: Vejle, Denmark

My B&O Icons:

Beolab-50.png Beolab-50.png
Beosound-9000.png Beosound-9000.png
Beovision-Eclipse.png Beovision-Eclipse.png
Beolab-28.png Beolab-28.png
Beoplay-M5.png Beoplay-M5.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-2.png Beosound-2.png
Beosound-Essence.png Beosound-Essence.png
-------------
BL50, BC Core, Eclipse, Stage, BS2, BP5, BS9000, BLC, BS Core, BS Moment, Halo. (BL28)

So today I god an USB key from the dealer with a newer version of the firmware (I am currently on 3.1.0.1187) they didn't tell me which version they sent, (can't determine from filename), just that it was the latest etc...

So... I turned on the speakers... inserted the USB key... then nothing... the USB key is lid up, but that's it... apparently it should start blinking in the LEDs, but I only have the "speaker" LED lid up.... but they told me to give it time...


My bet is that this is the same firmware I already have installed, so the speaker rejects it... but I'm not sure.. sadly there isn't a lot of information out there about this procedure...


Location: Vejle, Denmark

My B&O Icons:

Beolab-50.png Beolab-50.png
Beosound-9000.png Beosound-9000.png
Beovision-Eclipse.png Beovision-Eclipse.png
Beolab-28.png Beolab-28.png
Beoplay-M5.png Beoplay-M5.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-2.png Beosound-2.png
Beosound-Essence.png Beosound-Essence.png
-------------
BL50, BC Core, Eclipse, Stage, BS2, BP5, BS9000, BLC, BS Core, BS Moment, Halo. (BL28)
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.