Hi guys
When you google this topic you actually get a hit from one of the old archived forums, sadly it isn't reachable...
I have a set of BL50 connected to a BC Core via USB.
The two speakers are connected via DPL (CAT8, 5Meters)
It has been working fine for 4-5 months, but recently the slave speaker drops out randomly...
I can then power off, and the slave is working again...  While the slave is in this non-playing state, I am still able to change the narrow/wide mode and it reacts on the slave...

Now I have been working with my local B&o Reseller to figure out where problem is...
I have tried replacing the DPL cable with a new CAT8 cable...  the problem persists here..

We then tried removing the BC Core and connecting via Wireless PL to my Eclipse, and strangely enough we are unable to replicate the problem in this setup...
For various reasons the WPL setup will not fly in the long run, so I had to switch back to BC Connect...  and promptly I got the problem again now...

I was hoping that I wasn't the only one with this problem?
So any help would be great...

I am waiting for my B&o dealer to return to me with an action plan... and it will most likely involve replacing the slave...  and eventually the master if it doesn't solve the problem..

Not sure why, but B&o has been kinda a nightmare for me since I bought a set of BL28 some years back...  I had them setup in a wireless setup, and there were _many_ problems with them... so I ended up upgrading to BL50 and all cabled setup...  and here we are.. :-)
So the next step naturally must be the BL90?...  

/H