I’ve had a couple of Beolab 8000s for a while now and both have worked well except for humming when connected to RCA. After being stored for a year now only one of them is working. Found that the nut on both RCA connectors was loose which I tightened and now the humming is gone from the working speaker. There was foam rot, but it seems the PCB’s are in good condition.
- There’s no click from the relay
- No red or green LED
- There's no voltage across the pin 7 + 9 or pin 10 + 12 on T2 which should be at 20V.
Although it visually looks fine I'm thinking T2 might need a replacement, but maybe there's something I'm not considering... ?
If T2 needs to be replaced, where can I get one? (shipping to Norway)
Is there also a place where I can get replacement foam? I'm also changing the foam on the working speaker.
- There’s no click from the relay
- No red or green LED
- There's no voltage across the pin 7 + 9 or pin 10 + 12 on T2 which should be at 20V.
Although it visually looks fine I'm thinking T2 might need a replacement, but maybe there's something I'm not considering... ?
If T2 needs to be replaced, where can I get one? (shipping to Norway)
Is there also a place where I can get replacement foam? I'm also changing the foam on the working speaker.
