beogram 5500 turntable repair, gear disassembly?

32 replies
So far I've replaced the 2x 10,000uF caps in the 5500 amplifier, and most of the big caps in the 5500 CD player. The 4700uF I ordered was too tall for the CD player PCB to close down again ( doh!! ) so will have to order a shorter one.

 

The 5500 TT parts are here, will take a stab at it later today.

 

At least I have music now :) the CD player is running, I'm curious if it'll get warm like before. I need to order a belt for the 5500 tape deck, too. Motor spins but I assume the drawer belt has stretched/dried out, as it won't grip.

 

Thanks again, for all the help!
 

I tested the regulator compared to a new one, and thought it was bad. I'd like to kick the sadistic engineer who designed the regulator mounting system in the groin!! What a stupid setup. Why didn't they just screw it down?

 

Anyway after new regulator, new 1000uF cap C3 & new 1uF cap C4, I am still not getting any voltage out of the power supply.

 

So I'm thinking it must be PS diodes, or there are 2 other caps in there, on the schematic. Hopefully the power transformer is good. I'd think the fuse would have protected that though?

 

Ps do I need to have the TT hooked up to the rest of the system to troubleshoot this? I assume just plugging the power cord in should give me something to work with?

 

Thanks for any advice!
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.