beogram 2200 din plug

3 replies
K(
Offline
kingarthur (archived2)
Bronze
Posted September 13, 2014 at 18:55 GMT
#2220191

hi i have bought a beogram 2200 deck and the din plug has been cut off. could anyone help me with the re wiring arrangement of the cables. there is a black cable with its common ground, a white cable with common ground both sheathed with a earth winding binding the two together. hope someone can help me am new to the b&o world but hooked already. many thanks in the anticipation of a reply. dean

P(
Offline
peterwillsher (archived2)
Bronze
Posted August 23, 2015 at 20:32 GMT
#2220192

B&O used the standard DIN wiring configuration for the DIN connectors

with a five pin plug the pins are numbered 1 4 2 5 3

3 being the common ground

5 & 3 being signal output.     3 left. 5 right

P(
Offline
peterwillsher (archived2)
Bronze
Posted August 23, 2015 at 20:36 GMT
#2220193

ERROR

in my previous message I mistakenly wrote that pin 3 was the ground ; that sound have been pin 2 (in the middle of the semi-circle)

apologies

 

p.s. White might be Right ( rhyming )

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold