Looking for help Beocord 5000

11 replies
AU
Offline
Audric
Bronze
Posted April 12, 2022 at 08:33 GMT
#1640749
Hi everyone,

Audric from Belgium, I'm new on the forum :)

I'm trying to reassemble a beocord 5000 (4715) and realised that the dust cover spring was not properly connected. I have been trying for more than a hour to have the proper effect on the cover, but in vain. Here's a picture of the spring:



Does anyone know the effect it is suppose to have (forcing to close or to open?) or a picture of a properly mounted one?

 

Thanks in advance,

Regards,

 

Audric
Mark-sf
Offline
Mark-sf
Bronze
Posted April 13, 2022 at 07:30 GMT
#1646305
There are two springs that govern the damped closing of the cover. This is discussed at the end of the service manual at https://beomanuals.com/manuals/Beocord/Beocord%205000/Beocord_5000-Service_Manual-version4.pdf
AU
Offline
Audric
Bronze
Posted April 13, 2022 at 08:42 GMT
#1646306
Hi Mark,

Thank you for your answer!

I mounted everything back together (using the cardboard strip procedure), but the main spring still forces the dust cover to close, is that the normal behaviour? The 2 small lateral springs are not connected to the main dust cover but to the panel underneath :



Thank you in advance,

Best regards,

 

Audric
chartz
Offline
chartz
Bronze
Posted April 13, 2022 at 15:18 GMT
Edited April 13, 2022 at 15:20 GMT
#1646310
Great deck. I have two (that don’t chew any tapes ?)!

I did the same mistake on the first one. I steered clear of removing the second one… Good you’ve solved it.

Funny blue belt, by the way.
Jacques
AU
Offline
Audric
Bronze
Posted April 13, 2022 at 18:47 GMT
#1646311
Hi Chartz,

The blue belt is not genuine, it's a temporary replacement to test the beast ^^

The spring is forcing the dust cover to close by itself, is that the correct behaviour?

Thank you in advance,
chartz
Offline
chartz
Bronze
Posted April 13, 2022 at 20:45 GMT
Edited April 13, 2022 at 20:47 GMT
#1646312
It has only two positions: fully up or fully down. It doesn’t hold in between.

Have you ordered Martin’s belts?
Jacques
AU
Offline
Audric
Bronze
Posted April 13, 2022 at 21:35 GMT
#1646313
I have problem then, because it doesn't stay open... :(

No, I don't know Martin :/
AL
Offline
alvar
Bronze
Posted April 14, 2022 at 07:59 GMT
#1646318
Hello!

The metal rod must be inserted vertically in the central plastic piece of the dust cover. There is a groove to insert the rod, but I guess you know that. As fas as I know it keep the dust cover open or close. Hope it helps
AU
Offline
Audric
Bronze
Posted April 14, 2022 at 08:46 GMT
#1646320
Hi Alvar,

That's what I did somehow, but the rod forces the cover to close. If I try to have it acting in the other opposite direction (force to open), tension in the rod gets very important, I'm afraid to brake something and not sure the cover won't open by itself.



 
HC
Online
hcraig244
Silver
Posted April 14, 2022 at 11:34 GMT
#1646322
I'm pretty sure the dust cover is meant to close under the spring tension, mine does and I think its normal operation.....lifting the lid manually and the spring closes it ;¬)

Craig
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold