How to remove Beo 9000 from wall mount

9 replies

Offline

George M

Bronze

Posted November 14, 2023 at 02:30 GMT

Hi all,

So I have my Beosound 9000 6 cd changer mounted on my wall and want to remove it for cleaning. I didnt actually install it on the brackets when I moved in. What is the best way to remove it? My sound has become a bit distorted sometimes and I just cleaned my CD lense reader which helped alot.

Also have my speakers on brackets on the wall too that dont want to budge. They are raindrop shaped ones if that makes sense ...

Any help would be appreciated. Thanks

Offline

Tignum

Gold

1008 posts

Posted November 14, 2023 at 08:04 GMT
Edited November 14, 2023 at 08:04 GMT

#1660107

Hello George, on the sides of the wallmounts you should be able to see a (bit of) the red latch through hole C (see below). Pushing with a suitable pin will release the hatch, and you should be able to slide the speaker off.

As a sidenote, are the 4000s not aiming too much at the floor? Part B of the wall bracket can be positioned using the ribs on the back in case you want them to be tilted more upward.

I hope someone else can help with the BS9000!

Best of luck, Johan

Location: Netherlands

My B&O Icons:

Offline

George M

Bronze

4 posts

Posted November 15, 2023 at 01:26 GMT

#1660126

thanks johan this is very helpful ...

Anyone able to help me with the BS9000 also? Thanks

Offline

Valve1

Gold

1715 posts

Posted November 15, 2023 at 06:58 GMT

#1660127

I am not familiar with this wall bracket or way of mounting it. From the 2 brackets I do know the 9000 usually is hanging on two pegs so its just a straight lift up.

BUT do have a second person to assist as once you have lifted it just above the wall bracket you will need to disconnect the power cable and speakers. Its a bit fiddly but you will have to do this in reverse to put it back up.

My B&O Icons:

Offline

matador

BronzeModerator

2425 posts

Posted November 15, 2023 at 16:41 GMT
Edited November 15, 2023 at 16:41 GMT

#1660137

This is the usual B&O table stand hooked to the wall.
Tilt and lift the main unit to separate it from the wall hooks part. See Below.

Location: Paris France

Offline

jmen

Bronze

22 posts

Posted November 15, 2023 at 18:13 GMT

#1660139

If the Beosound 9000 is mounted flat on a wall, then there should be a plate with hooks mounted to the wall and a plate with openings mounted to the BS9000. As mentioned above, dismounting the BS9000 from the wall is accomplished by lifting the unit vertically (to clear hooks in wall plate) and then away from the wall (to separate unit plate from wall plate).

My B&O Icons:

Offline

George M

Bronze

4 posts

Posted November 16, 2023 at 02:52 GMT

#1660144

thanks .. I got it off the wall but still trying to get it off the bracket ... seems almost glued onto it haha ... Any special way to take it off the bracket or just tilt and lift off?

Thanks

Offline

Valve1

Gold

1715 posts

Posted November 16, 2023 at 06:58 GMT

#1660147

Thanks Matador, I did not know the table bracket could be wall mounted.

George M, it looks like a tilt and lift is the solution.

My B&O Icons:

Offline

matador

BronzeModerator

2425 posts

Posted November 17, 2023 at 10:02 GMT

#1660176

Location: Paris France

Join BeoWorld

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold

How to remove Beo 9000 from wall mount

George M

Tignum

George M

Valve1

matador

jmen

George M

Valve1

matador

Please Log In to Reply

Join BeoWorld

December 2026 Prize Draw