hmmm. That didn't help. Tried with a new ML cable, but same issue 🙁

If the BS4 is in option 4,5 or 6, it would work for CD and RADIO but would not be able to control N.MUSIC.

The BS4 should be in option 1 or 2.

Also, Have you tried to disconnect both from the mains for 10 minutes?

Hi Phil, I think this should not be a problem. If BS4 is set to option 6 it can of course bring up the net music as a local link product provided that the Beomedia1 should be in option 2.

Anoher point and maybe it's stupid but have you already switched on, on BS4, the N.Music option? (If I remember correct I think it needed this)

I would also try this: Put BS4 Option 2 and Beomedia Option 2 but remove the ir from Beomedia to check it as well. By the way, what speakers do you have on BS4?

Either the BS4 is option 2 and the BM1 is option 6 or the BS4 is option 6 and the BM1 is option 2. Both should work, but the first is what the PCG recommends.

2 and 2 should not work as there would be two audio masters on the ML network.

In case of 2 and 2 indeed we would have double commands so.......

But Option 6 or BS4 and option 2 of BM1 should do it. Come on try it and let us know!!!!!

Another question... Is the BM1 connected to a TV? a Beovision?

Are the speakers connected to the BS4, BM1, TV?

BS4 option6, BM1 option2 doesnt work.

I have no TV in the setup. Only BS4 connected to BM1 via ML. I have BL5 connected to BS4

Only options in BM1 are 1 and 2 (VM)

Hi!

I have a setup with BM1, BS4, AVANT32DVD, BEOLAB4000 in main room. MX4200 in link room.

I get n.music and n.radio info in BS4 - but no sound. I get no audio in ML when using n.music or n.radio.

BM1 functions with AVANT32 (V.AUX), I get audio from the BM1 standard audio card. I do not get audio from the recommended BM1 audio out (under ML connection).

Did you solve your problem BBHE?

BBHE wrote:

BS4 option6, BM1 option2 doesnt work.

I have no TV in the setup. Only BS4 connected to BM1 via ML. I have BL5 connected to BS4

Only options in BM1 are 1 and 2 (VM)

The BM1 is like an enhanced beoport/beopc2 with its own software onboard, unlike the pc2, which needs a pc to function properly.

So, the BM1 needs an audio(or video)master in the system. And that will be the bs4!

So option 2 for the bs4 and option 1 or 0 for the BM1 is the correct setting.

The '"PC, Vaux, Vtape2" setting isn't important, as the bs4 asks for the BM1 over the ML with the NMusic/NRadio instruction.