Hi there.

I think there is another problem since I have almost the same setup in my house and of course the music from Beomedia1 does come out from the BS4 I have two floors downstairs.

You do not need to have the audio connected as well. Check with your cabling and if options are set the right way.

It should in principal work like you have it setup without the A.Aux or V.Aux cables.

Hi,

ok, that sounds good. Could you please help me with the options settings?

Hi,

if the sound is coming out when you press AUX then you must have some connection from the beomedia to the beosound ...

what happens when you disconnect that connection and press N.MUSIC ?

[ I have a BeoPort connected via ML to my Beosound 4 and it works exactly as it should, but there is no way for me to connect my BeoPort via the Aux-in ]

Hi,

If I disconnect the AUX connection I cant hear any sound. Info from track is writen in BS4 display, but no sound.

I'am not sure if my options settings are correct. I have BS4 in option2 and BM1 in option1

Two issues.

First check the ML cable because I think there is something wrong from that side. It should work directly from ML to ML without any additional cables. (Remove anything apart from the ML cable, Reset and then restart.

Second thing, check your Beomedia setup that it should listen to the PC command and also check if it can work with BS4 Option 6 and Beomedia option 2. Also if you have an IR eye on Beomedia remove this as well.

Hi,

Beomedia is set up to listen to PC command. BS4 Option6, BM1 Option2.

I removed the IR eye on Beomedia1.

But now I cant control the Beomedia1. When I press N.Music, BS4 doesnt start up.

I will try to change my ML cable. I think your right. Something must be wrong with the ML

I think that 99,9% should be the ML cable!! Just make a new one and give it a try. It should work.

Thanks alot for the help.

I'll give some feedback next week, after trying with a new ML cable

Keep us posted. It would be interesting to find out what was the problem!!