Adrian,

The HP Windows Media Centre uses Philips RC6 protocol and the XML you downloaded from the Beo5 Information and Resource pages was made with the XML Generator which only creates output in RAW form.

RAW is effectively an image copy of the orginal which works fine for most situations except where you want a repeat key or similar.

The RC6 protocol uses a "Toggle" bit at the end of the header which inverts each time you press the same key or leave your finger on a key because you are sending an image copy, this toggle bit never inverts until you press another command. That's why you have the problem.

To overcome this problem the commands would need to be converted to "Bitstream" instead of RAW.

🙂Cheers keith you are the star they say you are

So the obvious question is how do I convert (will investigate over the weekend unless you have an instant fix)

Thanks again

Adrian

Feeling very thick here but can't see a way to do this convertion from raw to bit stream for rc6. Can the Beo5 actully support this?

Please do not consider yourself "thick" its actually a very complex subject and one I plan to write an overview on when I get time.

Bitstream is not a protocol, it is a bit representation on a timeslice basis for both the PULSE and the SPACE which makes up the PERIOD of one binary bit. The timeslice is the smallest time of any pulse or space.

What makes RC5 and RC6 protocols unique and more complex is they use what is called "Bi Phase Coding" which in practical terms means a rising edge within a time slice window is equal to a binary "1" and a falling edge represents a binary "0"

You ask, can the Beo5 actually support this ? the answer is YES

The best way forward is with an example, over the next couple of days I will convert a couple of commands and post them.

thanks keith  I'll look forward to that.

Assuming I can work out what was done I'll also commit to converting some others

Cheers