Double Click on Sony BDP

8 replies
A(
Offline
apearce (archived)
Bronze
Posted February 19, 2009 at 16:41 GMT
#1780480

Hi,

I'm having a strange issue where after three attempts at different Sony BDP codes on my Beo5, i'm still required to double click buttons for them to have any affect.

Example is the DVD menu screen, to move left and right i have to click the left small arrow (centre of remote) twice for it to move once in that direction.

My Blu-Ray is the latest BDP-S550.I have the latest firmware on the Beo5 also, BS3 firmware was probably updated last in October last year.

I'm uncertain as to if it is the remote or possibly my BS3 that has the issue. I'm hoping to rule out the remote by taking it into my dealer and putting it into dealer mode to test. Failing that i'm a bit lost as to what to look at. My dealer has tested his own Beo 5 with my Blu-Ray player, which i took into the shop, however once i got it home and tried on my own, it requires two clicks. Once playing a movie, various buttons don't work, such as stop, however double clicking left and right will FFW and RWD and double clicking on Play will play, but i'm unable to stop/pause.

Any suggestions would be greatly appreciated.

 

F(
Offline
frank2u (archived)
Bronze
Posted February 20, 2009 at 05:44 GMT
#1780481

Hallo,

not sure if this is corrected in the actual PUC. There is an error with the value of NumSignalReps.

http://forum.beoworld.org/forums/t/20948.aspx

Frank

A(
Offline
apearce (archived)
Bronze
Posted February 20, 2009 at 07:55 GMT
#1780482

Thanks Frank, i didn't realise how that post had progressed.

B(
Offline
beogram4 (archived)
Bronze
Posted July 3, 2009 at 10:31 GMT
#1780483

Where is this parameter "NumSignalReps" situated?

I can't find it client xml.

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted July 3, 2009 at 10:41 GMT
#1780484

Sony original remotes transmit the IR binary command string 3 times for any single command press

Location: Hampshire, England

B(
Offline
beogram4 (archived)
Bronze
Posted July 3, 2009 at 11:17 GMT
#1780485

But beo5 works only with double click....

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted July 3, 2009 at 12:28 GMT
#1780486

beogram4 wrote:

But beo5 works only with double click....

I understand that..

The entry in the PUC only transmits the IR signal once and the STB needs to see a minimum of two transmisions, that's why you need to press the button twice. The problem is the PUC entry is incorrect.

 

Location: Hampshire, England

B(
Offline
beogram4 (archived)
Bronze
Posted July 4, 2009 at 02:13 GMT
#1780487

I created xml-file using xml-generator. I didn't see topic "The IR "Repeat signal". This is the same problem. 

Keith can you explain in detail how convert "raw" in "bitstream" in xml-file (in detail) or send link on theory page )).

 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold